Tag Archives: standard cylinder

China Standard Csdls High Performance Custom Boom Oil Cylinder for Heavy Machinery Construction with Good quality

Product Description

Cylinder Type: Mill type, head bolted, base welded
Structure: Piston type
Standard: GB/T15622-1995  JB/T15715-2000
Bore diameter: Up to 700mm
Rod diameter: Up to 500mm
Stroke length: Up to 10,000mm
Piston rod material: 20#,45#,40Cr, 27SiMn,30CrMo,35CrMo,42CrMo
Rod surface treatment: Hard chrome plated, chrome/nickel plated, ceramic coated
Tube material: 20#, 25#, 45#, 27SiMn,30CrMo,35CrMo,42CrMo
Tube surface painting: Colors as RAL, thickness according to request
Mounting type: Clevis, cross tube, flange, trunnion, tang, thread
Design pressure: Up to 40Mpa
Seal kits type: PARKER, MERKEL, HALLITE, NOK, TRELLEBORG

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO9001
Pressure: with High and Low Pressure Switch
Work Temperature: Normal or Lower Temperature with Matched Sealing
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Switching or Regulated Type
Samples:
US$ 226/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

boom cylinder

How does a boom cylinder handle variations in load capacity and weight?

A boom cylinder is designed to handle variations in load capacity and weight in heavy machinery. Here’s a detailed explanation:

When a machinery equipped with a boom cylinder is used for different tasks, the load capacity and weight requirements may vary. The boom cylinder is designed to accommodate these variations and ensure optimal performance. Here are the key factors that contribute to how a boom cylinder handles load capacity and weight variations:

  • Force Generation: The boom cylinder generates the necessary force to move the boom, arm, or attachment of the machinery. The force generated by the cylinder can be adjusted based on the load capacity and weight requirements. By controlling the hydraulic pressure and flow rate, the operator can regulate the force exerted by the cylinder, allowing it to handle both lighter and heavier loads.
  • Adjustable Stroke Length: Boom cylinders often have an adjustable stroke length, which is the distance the piston can travel within the cylinder. By adjusting the stroke length, the cylinder can adapt to different load capacities and weight distributions. For heavier loads, a longer stroke may be required to provide the necessary extension or retraction of the boom. Conversely, for lighter loads, a shorter stroke may be sufficient, optimizing the cylinder’s efficiency.
  • Pressure Compensation: Some boom cylinders are equipped with pressure compensation mechanisms. These mechanisms automatically adjust the hydraulic pressure within the cylinder to compensate for variations in load capacity and weight. For example, as the load on the boom increases, the pressure compensation mechanism increases the hydraulic pressure, ensuring consistent force and control throughout the operation.
  • Integration with Load Sensing Systems: Boom cylinders can be integrated with load sensing systems that provide real-time feedback on the load capacity and weight. Load sensing systems use sensors to measure the force exerted on the boom or attachment and transmit this information to the hydraulic control system. The hydraulic control system can then adjust the pressure and flow rate to match the load requirements, optimizing the cylinder’s performance.
  • Multi-Stage Cylinders: In some cases, machinery may be equipped with multi-stage boom cylinders. These cylinders have multiple sections or stages that can be extended or retracted independently. Each stage may have different dimensions and force capabilities. By adjusting the extension or retraction of each stage, the cylinder can adapt to varying load capacities and weight distributions, providing precise control and handling.

By incorporating these design features and mechanisms, a boom cylinder can effectively handle variations in load capacity and weight. This allows the machinery to perform a wide range of tasks with different load requirements, providing versatility and efficiency in industries such as construction, mining, material handling, and more.

boom cylinder

Can boom cylinders be used in forestry equipment for tree handling?

Yes, boom cylinders can be used in forestry equipment for tree handling. Here’s a detailed explanation:

Forestry equipment is specifically designed for various tasks related to the harvesting, processing, and transportation of trees and timber. Boom cylinders play a crucial role in tree handling within forestry equipment. Here’s how boom cylinders are utilized in this context:

  • Tree Felling: Boom cylinders are used in tree felling equipment, such as feller-bunchers or harvesters. They provide the necessary hydraulic force to control the cutting head or cutting arm, allowing operators to fell trees with precision and control. Boom cylinders enable smooth and controlled movement during the tree felling process.
  • Tree Loading and Unloading: In forestry equipment used for log loading and unloading, such as log loaders or skidders, boom cylinders are employed to handle the trees. They enable the lifting, lowering, and positioning of logs or tree stems for loading onto trucks or transporting within the logging site. Boom cylinders provide the necessary force and controlled movement for efficient tree handling.
  • Tree Processing: Forestry equipment used for tree processing, such as delimbers or debarkers, utilize boom cylinders to manipulate the trees during the processing operations. Boom cylinders facilitate the controlled movement, positioning, and rotation of the trees, allowing for efficient and precise processing.
  • Attachment Control: Boom cylinders are also used to control various attachments in forestry equipment. For example, grapples or clamps used for tree handling can be actuated by boom cylinders. This enables secure gripping, lifting, and manipulation of trees, enhancing the efficiency and safety of tree handling operations.

The use of boom cylinders in forestry equipment for tree handling offers several benefits:

  • Precise Control: Boom cylinders provide operators with precise control over the movement and positioning of trees. This precision allows for accurate felling, loading, unloading, and processing of trees, minimizing waste and optimizing productivity.
  • Efficient Tree Handling: Boom cylinders enable efficient tree handling by providing the necessary force to lift and manipulate trees of various sizes and weights. The controlled movement and positioning facilitated by boom cylinders streamline the workflow and reduce manual effort, improving overall productivity.
  • Operator Safety: Boom cylinders contribute to operator safety during tree handling operations. The controlled movement and stability provided by boom cylinders minimize the risk of accidents or injuries caused by uncontrolled tree movement or sudden shifts in load.
  • Adaptability: Boom cylinders can be customized to match the specific requirements of different forestry equipment and tree handling tasks. This adaptability allows for versatility in tree handling, accommodating various tree species, sizes, and terrain conditions.

Overall, boom cylinders are valuable components in forestry equipment for tree handling. They enable precise control, efficient tree manipulation, operator safety, and adaptability to various tree handling tasks in the forestry industry.

It’s important to consult the equipment manufacturer’s guidelines and recommendations to ensure the proper selection, installation, and maintenance of boom cylinders in forestry equipment.

boom cylinder

What are the key components and features of a boom cylinder?

A boom cylinder consists of several key components and features that enable its functionality and performance in heavy machinery. Here’s a detailed explanation:

  • Cylinder Barrel: The cylinder barrel is the main body of the boom cylinder, typically made of high-strength steel. It houses the piston, seals, and other internal components. The cylinder barrel is designed to withstand high pressure and provide structural integrity to the cylinder.
  • Piston: The piston is a cylindrical component that moves back and forth inside the cylinder barrel. It is usually made of durable materials and acts as a barrier between the two chambers of the cylinder. The piston divides the cylinder into a rod side and a cap side, allowing hydraulic fluid to act on one side or the other to create the desired motion.
  • Rod: The rod is a solid metal shaft attached to the piston and extending outside the cylinder barrel. It transmits the force generated by the hydraulic fluid to the boom or other connected components. The rod is designed to withstand tensile and compressive forces and is often coated or treated to resist corrosion and wear.
  • Seals: Seals are essential components that prevent hydraulic fluid leakage and maintain the integrity of the cylinder. They are positioned between the piston, rod, and cylinder barrel to create a tight seal. Common types of seals used in boom cylinders include piston seals, rod seals, and wiper seals.
  • Ports and Fittings: Boom cylinders have ports and fittings that allow the connection of hydraulic hoses or pipes to supply hydraulic fluid. These ports enable the controlled flow of hydraulic fluid into and out of the cylinder, creating the necessary pressure for boom movement.
  • Mounting Brackets: Mounting brackets are used to attach the boom cylinder to the heavy machinery’s frame or structure. They provide stability and support, ensuring proper alignment and secure installation of the cylinder.
  • Internal Cushions: Some boom cylinders feature internal cushions or shock absorbers. These cushions help dampen the impact and reduce vibrations during the extension or retraction of the boom. Internal cushions improve the smoothness of boom movement, enhance operator comfort, and reduce stress on the cylinder and other components.
  • Corrosion Protection: Boom cylinders are often coated or treated with corrosion-resistant materials to withstand harsh environmental conditions. These protective measures help extend the cylinder’s lifespan and maintain its performance over time.
  • Load Capacity and Pressure Rating: Boom cylinders are designed with specific load capacities and pressure ratings to handle the heavy loads and pressures involved in heavy machinery operations. The load capacity and pressure rating determine the cylinder’s strength and suitability for different applications.

In summary, the key components and features of a boom cylinder include the cylinder barrel, piston, rod, seals, ports and fittings, mounting brackets, internal cushions, corrosion protection, load capacity, and pressure rating. These components and features work together to enable the controlled extension, retraction, lifting, and lowering of the boom in heavy machinery, ensuring efficient and reliable operation.

China Standard Csdls High Performance Custom Boom Oil Cylinder for Heavy Machinery Construction   with Good quality China Standard Csdls High Performance Custom Boom Oil Cylinder for Heavy Machinery Construction   with Good quality
editor by Dream 2024-05-16

China Standard Customized Arm/Boom Hydraulic Cylinder for Excavators wholesaler

Product Description

Komatsu PC1250-8 Excavator Arm/Boom/Stick Ram Cylinder 
 

CHINAMFG specializes in manufacturing hydraulic cylinder for many CHINAMFG construction machinery manufacturers such as Hitachi, Cat,  Parker, Komatsu, Volvo, Doosan, etc. (Top quality CHINAMFG Spare Parts)

Hydraulic cylinders are the most effective and efficient method of pushing, pulling, lifting, and lowering. 

 

Nowadays hydraulic cylinders play an essential role in daily application and industry: 
√ Mining
√ Earthmoving & Construction
√ Agriculture &Forestry
√Waste Management & Material Handing
√Ship crane & offshore

 

Selecting the right cylinders for an application is critical in obtaining maximum performance and reliability. 

 

CHINAMFG team takes all your concerns into consideration to suit your hydraulic cylinder requirements. 

 

Together, we work out the best design solution for your application. 

FAQ 
Q1.Do you have MOQ?
      Depending on different ideas, Can be negotiated. The larger the quantity is, the competitive the unit price will be.
Q2.Should the customer pay the delivery fee, How much is it?
       For the delivery fee, many samples are being requested to be sent, so we must get the delivery fee.
       If you tell me to use the appointed Express, you will give me your express account or you will pay according to the Express.
       If you do not request, I will choose a cheap one in China.
Q3.How about the after sale service?
      1) We will always keep the quality the same as the buyer’s samples and if there is something with the quality, we will make compensation for our customers.
      2) We will suggest our packing and take charge in our packing, we will keep the goods safe in the delivery.
      3) We will trace the goods from the production to selling, we will solve the problems in the selling for our customers.
Q4.When can I get a price?
      We usually quote within 24 hours after we get your inquiry.
Q5: Are you a trade company or manufacturer?
      We are a professional manufacturer with our own factory.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: RoHS, CE, ISO9001
Pressure: High Pressure
Work Temperature: High Temperature
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

boom cylinder

Can boom cylinders be repaired or replaced when damaged?

Yes, boom cylinders can be repaired or replaced when damaged. Here’s a detailed explanation:

Boom cylinders, like any other mechanical component, can experience damage or wear over time due to various factors such as heavy use, environmental conditions, or accidents. However, they can often be repaired or replaced to restore functionality and extend the lifespan of the machinery. Here are the options for addressing damaged boom cylinders:

  • Repair: Depending on the extent of the damage and the specific issue, certain components of a boom cylinder can be repaired. Common repairs may include fixing leaks, replacing damaged seals or gaskets, repairing or replacing damaged rods, or reconditioning the cylinder’s body. These repairs are typically performed by skilled technicians or hydraulic specialists who have expertise in boom cylinder repair.
  • Replacement of Components: In some cases, specific components of a boom cylinder may need to be replaced. This could include replacing damaged rods, piston heads, seals, or other internal parts. By replacing the damaged components, the cylinder can be restored to proper working condition. It’s important to use high-quality replacement parts that meet the manufacturer’s specifications to ensure compatibility and performance.
  • Complete Cylinder Replacement: If the damage to the boom cylinder is extensive or if repair is not feasible, a complete cylinder replacement may be necessary. In such cases, the damaged cylinder is removed from the machinery, and a new or refurbished cylinder is installed. Complete cylinder replacements are typically carried out by authorized service centers or dealerships to ensure proper installation and compatibility with the machinery.

The decision to repair or replace a boom cylinder depends on factors such as the extent of the damage, cost-effectiveness, availability of replacement parts, and the overall condition of the machinery. It is recommended to consult with qualified technicians or professionals who have expertise in hydraulic systems to assess the damage and provide appropriate recommendations.

Regular maintenance and inspections can help detect potential issues with boom cylinders early on, allowing for timely repairs and minimizing downtime. Following the manufacturer’s recommended maintenance schedule and implementing proper operating practices can also contribute to the longevity and reliability of boom cylinders.

boom cylinder

How does a boom cylinder handle variations in hydraulic seal technology?

A boom cylinder is designed to handle variations in hydraulic seal technology. Here’s a detailed explanation:

Hydraulic seals are critical components in boom cylinders, as they prevent fluid leakage and ensure the efficient operation of the hydraulic system. Over time, advancements in seal technology have led to the development of various types of hydraulic seals with different characteristics and capabilities. A boom cylinder is engineered to accommodate these variations in hydraulic seal technology. Here’s how it handles them:

  • Compatibility: Boom cylinders are designed to be compatible with different types of hydraulic seals. They are constructed with seal grooves and dimensions that allow for the installation of various seal profiles, such as O-rings, lip seals, or piston seals. The cylinder is engineered to work effectively with the specific seal type or design chosen for a particular application.
  • Seal Selection: The selection of hydraulic seals for a boom cylinder depends on factors such as operating conditions, fluid compatibility, pressure requirements, and temperature ranges. The cylinder design takes into account the seal selection process, ensuring that the cylinder’s materials, surface finishes, and tolerances are suitable for the chosen seal technology. This ensures optimal sealing performance and longevity.
  • Seal Retention: Boom cylinders incorporate features to securely retain hydraulic seals in their proper positions. These features may include seal backup rings, snap rings, or integrated seal retention systems. The cylinder’s design ensures that the selected seal technology is effectively retained, preventing seal displacement or failure during operation.
  • Seal Maintenance and Replacement: Boom cylinders are designed to facilitate seal maintenance and replacement. They may include access points or disassembly features that allow for convenient seal inspection, lubrication, or replacement. The cylinder design takes into consideration the specific requirements of the chosen seal technology, making it easier for technicians to service or replace seals as necessary.
  • Seal Performance Optimization: Boom cylinders undergo rigorous testing and validation processes to optimize seal performance. The cylinder’s design and manufacturing processes aim to minimize seal friction, reduce wear, and enhance sealing efficiency. This ensures that the cylinder can effectively handle the specific characteristics and variations of the chosen hydraulic seal technology.

Overall, a boom cylinder is engineered to handle variations in hydraulic seal technology. It is designed to be compatible with different seal types, facilitate seal selection, retain seals securely, allow for seal maintenance and replacement, and optimize seal performance. These features ensure that the boom cylinder can effectively accommodate the advancements and variations in hydraulic seal technology, providing reliable and efficient sealing in hydraulic systems.

It’s important to follow the manufacturer’s recommendations and specifications regarding the selection, installation, and maintenance of hydraulic seals in boom cylinders to ensure optimal performance and longevity.

boom cylinder

What industries commonly use boom cylinders in their equipment?

Boom cylinders are commonly used in various industries that rely on heavy machinery for their operations. Here are some industries that commonly utilize boom cylinders:

  • Construction: The construction industry extensively uses boom cylinders in equipment such as excavators, backhoes, bulldozers, and cranes. Boom cylinders are essential for tasks like excavation, material handling, and lifting heavy loads, providing the necessary power and control for these operations.
  • Mining: In the mining industry, boom cylinders are integral to mining equipment like hydraulic shovels, loaders, and haul trucks. They enable the movement of the boom or arm, allowing for efficient digging, loading, and transportation of large quantities of materials or ores.
  • Material Handling: Industries involved in material handling, such as warehouses, logistics, and shipping, utilize boom cylinders in equipment like forklifts, reach stackers, and container handlers. Boom cylinders enable the lifting and positioning of heavy loads, enhancing efficiency and productivity in these operations.
  • Agriculture: Agricultural machinery, including tractors, harvesters, and loaders, often rely on boom cylinders for various tasks. These cylinders facilitate activities like lifting and tilting of attachments, such as buckets or forks, allowing farmers and agricultural workers to handle crops, feed, and other materials with ease.
  • Forestry: In the forestry industry, boom cylinders are used in forestry equipment like log loaders and forwarders. These cylinders assist in the manipulation and handling of logs or timber, enabling efficient loading, unloading, and stacking of wood products.
  • Waste Management: The waste management sector utilizes boom cylinders in equipment like garbage trucks, waste compactors, and recycling machinery. Boom cylinders aid in the movement of collection arms or compaction mechanisms, facilitating the efficient collection, compaction, and disposal of waste materials.
  • Demolition: In the demolition industry, boom cylinders are employed in equipment like demolition excavators or high-reach excavators. These cylinders provide the necessary power and control to extend and maneuver the boom, enabling precise demolition of structures and buildings.

These are just a few examples, and boom cylinders may find application in other industries where heavy machinery is utilized for specific tasks. Overall, boom cylinders play a vital role in industries that require the lifting, manipulation, and control of heavy loads, contributing to improved efficiency and productivity in their equipment.

China Standard Customized Arm/Boom Hydraulic Cylinder for Excavators   wholesaler China Standard Customized Arm/Boom Hydraulic Cylinder for Excavators   wholesaler
editor by Dream 2024-05-09

China Standard Free Custom Front End Telescopic Excavator Hydraulic Arm Boom Bucket Cylinder manufacturer

Product Description

Products Description                                                                                                   

Product Name

HSG Series Hydraulic Cylinder

Work Press

7/14/16/21/31.5MPa     37.5/63MPa Can be Customized

Material

Aluminum,Cast Iron,45mnb Steel,Stainless Steel

Bore Size

40mm–320mm,Customizable

Shaft Diameter

20mm–220mm,Customizable

Stroke Length

30mm–14100mm,Customizable

Rod Surface Hardness

HRC48-54

Paint Color

Black,Yellow,Blue,Brown,Customizable

Mounting

Earring,Flange,Clevis.Foot,Trunnion,Customizable

Warrenty

1 Year

MOQ

1 Piece

Delivery Time

7-15 Days,Also depands on specific demands

Certification

ISO9001,CE

Company Profile                                                                                                          
QIANGLIN HYDRAULIC MACHINERY CO., LTD

QiangLin is a professional hydraulic equipment manufacturer, mainly engaged in hydraulic system design, manufacture, installation, transformation, sales, and technical services. Our manufacturing facilities are certified to the ISO 9001 standard. We are an approved supplier to many equipment manufacturers in China. We are also partners with many customers from America, Canada, Australia, Germany, England, and other European Countries. Product quality, shorter delivery time, and customer satisfaction are our long-term commitments to our CHINAMFG customers. Hope to be your partner.

FAQ:                                                                                                                             
Q1: Are you a trading company or a manufacturer?
A: We have our own factory.
Q2: Are you able to make Non-standard or customized products?
A: Yes, we can.
Q3: How long is your delivery time?
A: Normally, the delivery time is 7 days if we have stock, 15-30 working days if we don’t. but it
also depends on the product
requirements and quantity.
Q4: Do you provide samples? are the samples free or not?
A: Yes, we can provide samples, but they are not free of charge.
Q5: What are your payment terms?
A: 30% deposit T/T or Irrevocable L/C at sight, If you have any questions, please feel free to
contact us.
Q6: What are your After-sales services?
A: Before shipment, Each individual product will be strictly inspected on our factory QC Process
System. In addition, We have a
Customer Service team to respond to customers’ questions within 12 hours. Being helpful in
solving customers’ problems is always our goal. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

boom cylinder

How does a boom cylinder handle variations in environmental conditions?

A boom cylinder is designed to handle variations in environmental conditions effectively. Here’s a detailed explanation:

Environmental conditions can vary significantly in different work environments where heavy equipment operates. Boom cylinders are constructed to withstand these variations and continue to function reliably. Here are some ways in which boom cylinders handle variations in environmental conditions:

  • Sealing and Protection: Boom cylinders are equipped with seals and protective measures to prevent the intrusion of contaminants, such as dust, dirt, water, or debris. The seals help maintain the integrity of the hydraulic system and protect internal components from damage caused by environmental factors. Additionally, protective coatings or treatments are often applied to the cylinder’s exterior to enhance its resistance to corrosion and wear.
  • Temperature Resistance: Boom cylinders are designed to operate within a wide temperature range. They are constructed using materials that can withstand both high and low temperatures without compromising performance. Specialized seals and hydraulic fluids are utilized to maintain proper functionality and prevent damage, even in extreme temperature conditions.
  • Fluid Compatibility: Hydraulic fluids used in boom cylinders are carefully selected to ensure compatibility with the anticipated environmental conditions. Factors such as temperature, humidity, and chemical exposure are taken into account when choosing the appropriate hydraulic fluid. The selected fluid should have the necessary viscosity and additives to provide optimal lubrication, prevent foaming, and resist degradation under the specific environmental conditions.
  • Corrosion Resistance: Boom cylinders are often exposed to environments that may contain corrosive elements, such as saltwater, chemicals, or acidic substances. To handle these conditions, cylinders are manufactured using materials that exhibit high corrosion resistance. Protective coatings, such as chrome plating or specialized paint, can be applied to further enhance the cylinder’s ability to withstand corrosive environments.
  • Regular Maintenance: Proper and regular maintenance is essential to keep boom cylinders in optimal condition and mitigate the effects of environmental variations. This includes inspections, cleaning, lubrication, and seal replacements as needed. By following manufacturer-recommended maintenance schedules and procedures, operators can address potential issues early on and ensure the longevity and reliability of the boom cylinders.

By incorporating sealing and protection mechanisms, temperature resistance, fluid compatibility, corrosion resistance, and regular maintenance practices, boom cylinders are designed to handle variations in environmental conditions. These features enable them to operate effectively and maintain their performance in diverse work environments, including construction sites, mining operations, forestry applications, and more.

It’s important to consult the equipment manufacturer’s guidelines and recommendations for specific environmental considerations and maintenance practices related to boom cylinders. This will help ensure the proper functioning and longevity of the cylinders in various operating conditions.

boom cylinder

How does a boom cylinder handle variations in cylinder size and capacity?

A boom cylinder is designed to handle variations in cylinder size and capacity. Here’s a detailed explanation:

Boom cylinders are hydraulic actuators used in various applications, such as construction equipment, material handling machinery, or forestry equipment. They are responsible for providing the necessary force and controlled movement to extend, retract, and articulate the boom or arm.

When it comes to handling variations in cylinder size and capacity, boom cylinders are designed and manufactured to match the specific requirements of the equipment and the intended application. Here’s how they handle these variations:

  • Size Customization: Boom cylinders can be customized in terms of size to fit different equipment configurations. The size of the cylinder, including its length and diameter, can be adjusted to ensure proper installation and compatibility with the boom or arm it is attached to. The size customization allows for optimized performance and efficient operation of the equipment.
  • Capacity Selection: Boom cylinders are available in different capacity options to handle varying loads and operating conditions. The capacity of the cylinder refers to its ability to generate the required force to move the boom or arm. Higher capacity cylinders are used for heavy-duty applications, while lower capacity cylinders are suitable for lighter loads. The appropriate capacity selection ensures that the boom cylinder can handle the specific load requirements of the equipment.
  • Pressure and Flow Control: Boom cylinders utilize hydraulic systems to generate the required force. The hydraulic pressure and flow rate can be adjusted or controlled to match the cylinder size and capacity. By regulating the pressure and flow, the boom cylinder can effectively handle variations in size and capacity while maintaining the desired performance and control.
  • Sealing and Internal Components: Boom cylinders are equipped with sealing systems and internal components that are designed to withstand the forces and pressures involved. These components are carefully selected to ensure compatibility with the cylinder size and capacity. Proper sealing and internal components help to maintain the cylinder’s efficiency and prevent leaks or failures, regardless of the size or capacity of the cylinder.

Overall, boom cylinders are engineered to handle variations in cylinder size and capacity by offering customization options, capacity selection, pressure and flow control, and appropriate sealing and internal components. These features ensure that the boom cylinders can effectively and reliably perform their intended functions across different equipment configurations and operating conditions.

It’s important to consult the equipment manufacturer’s guidelines and recommendations when selecting and installing boom cylinders to ensure compatibility and optimal performance.

boom cylinder

How does a boom cylinder differ from other types of hydraulic cylinders?

A boom cylinder differs from other types of hydraulic cylinders in terms of its design, function, and application. Here’s a detailed explanation of the differences:

  • Design: Boom cylinders are specifically designed for heavy machinery, such as excavators, cranes, and loaders, where they are used to control the movement of the boom. They are typically larger and more robust compared to other hydraulic cylinders to handle heavy loads and withstand harsh operating conditions.
  • Function: The primary function of a boom cylinder is to extend, retract, lift, and lower the boom of heavy machinery. It provides the necessary force and control to maneuver the boom for tasks such as excavation, material handling, or lifting heavy loads. Other types of hydraulic cylinders, such as single-acting or double-acting cylinders, may serve different purposes, such as linear motion control or actuation of specific machine components.
  • Application: Boom cylinders are predominantly used in heavy machinery applications where the boom’s movement is critical, such as construction, mining, and material handling. They are specifically designed to meet the requirements of these industries, including the ability to handle high loads, repetitive movements, and extreme operating conditions. Other hydraulic cylinders, on the other hand, have a wide range of applications across various industries, including manufacturing, agriculture, automotive, and aerospace.
  • Size and Capacity: Boom cylinders are typically larger in size and have higher load capacities compared to other hydraulic cylinders. This is because they need to accommodate the size and weight of the boom and handle the significant forces involved in heavy machinery operations. Other types of hydraulic cylinders come in various sizes and load capacities, depending on their specific application and requirements.
  • Integration: Boom cylinders are often integrated into the hydraulic systems and control mechanisms of heavy machinery. They work in conjunction with other hydraulic components, such as pumps, valves, and actuators, to ensure synchronized and precise boom movements. Other hydraulic cylinders may also be integrated into different systems, but their integration and functionality may vary depending on the specific application.

In summary, a boom cylinder differs from other types of hydraulic cylinders in terms of design, function, application, size, capacity, and integration. Its specialized design and function make it suitable for controlling the movement of the boom in heavy machinery, providing the necessary force, control, and durability required for demanding applications in construction, mining, and material handling industries.

China Standard Free Custom Front End Telescopic Excavator Hydraulic Arm Boom Bucket Cylinder   manufacturer China Standard Free Custom Front End Telescopic Excavator Hydraulic Arm Boom Bucket Cylinder   manufacturer
editor by Dream 2024-05-07

China Standard The Boom Cylinder of Excavator Hydraulic Cylinder Used for Excavator vacuum pump booster

Product Description

 

 

MEDIUM AND HIGH PRESSURE OIL CYLINDER FOR MICRO EXCAVATOR

Product Parameters

  • Mainly used for 1 ton ~4 ton micro excavator.
    Through strength accounting for cylinder, piston rod and other parts of the material selection, as well as the corresponding welding, electroplating and other special processing technology, to achieve light weight, high strength, high durability.
    The sealing system is produced and designed by our company, and the main seal uses the corresponding advantages of the international first-class sealing parts manufacturing company to meet the heavy working conditions and high strength work to ensure a long service life.

WORKING PRESSURE: 21~28MPA

OPERATING TEMPERATURE: -20ºC~100ºC

COLD REGION: -40ºC~90ºC

  • MODEL MARKING METHOD
    D60 x D35 x 460ST / 770CL

  • Additional negotiation based on size excess form
     

  • Cylinder outer diameter DO can be changed according to actual demand
     

  • The high pressure oil pipe needs to be attached for further discussion

Detailed Photos

Packaging & Shipping

  • Conventional wooden case packing, packing can be customized according to your needs.

Company Profile

ZheJiang CHINAMFG Machinery Equipment Co., Ltd. is an international sales subsidiary of ZheJiang CHINAMFG Hydraulic Technology Co., Ltd. Our company is Top 1 machinery parts production factory in ZheJiang , with 24 years production experience on research and development.
Our company specializes in the production of hydraulic cylinder, electric cylinder, hydraulic valve, integrated hydraulic valve, hydraulic tubing, structural parts, cab, balance iron and other products research and development, production.
At present, the Group has 4 factories, covering a total area of 864,000 square CHINAMFG and employing more than 2,200 people.
The company has supplied to more than 50 countries and regions around the world, and its products cover construction machinery, Marine ships, new energy equipment, tunnel machinery, aerospace, industrial manufacturing and other high-end parts fields.

  INDEPENDENT INNOVATION XIHU (WEST LAKE) DIS.S THE FUTURE

There are 120 full-time R&D personnel

R&d center to establish an open and efficient technical cooperation and innovation system, has a strong technology, team spirit of excellent team, the existing full-time R & D personnel 120 people, with domestic universities, research institutes to establish a long-term school-enterprise cooperation relationship, has provincial enterprise technology center engineering research center, industrial design center. Key laboratories and other scientific and technological innovation platforms have participated in the formulation of a number of national standards, undertaken more than 80 innovative research and development projects above the provincial level of the National CHINAMFG Program, and won a number of provincial and municipal scientific and technological progress awards. 

Our company to “create quality experience for customers” as the mission, the company has a professional after-sales department, the existing 20 professional after-sales personnel, improve your satisfaction, to solve your technical doubts.

  • Intelligent production line

  • Intelligent assembly line

  • Parts intelligent production line

  • Fully automatic opal + hard chrome intelligent production line

  • Automatic paint line

 

FAQ

 

1.How will you guarantee the quality? 
We have a professional R & D team, and will discuss with each production minister repeatedly and determine the production plan before the order production. We also have a professional quality inspection team to ensure that the order is completed with quality and quantity.And we will test and send testing video to buyer confirm before shipping too. 

2.When will you ship the order?
Once we get confirmation of payment,we will try our best to ship within 48 hours. 

3.How can I track my order?
Once your order in shipped,we will e-mail you shipping details.

4.If I was not satisfied with the products,can i return goods?
Yes,we offer exchange and repair service in the warranty time. 

5.What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

6. What is your terms of packing?
A: Generally, will pack in strong fumigate wooden pallet or Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO9001
Pressure: High Pressure
Work Temperature: High Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type
Samples:
US$ 399/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

boom cylinder

What are the advantages of using boom cylinders in heavy equipment?

Using boom cylinders in heavy equipment offers several advantages. Here’s a detailed explanation:

Boom cylinders play a critical role in the movement and control of booms, arms, or attachments in heavy equipment, such as excavators, cranes, loaders, and bulldozers. The advantages of using boom cylinders include:

  • Powerful and Precise Movement: Boom cylinders provide powerful hydraulic force that enables heavy equipment to lift, extend, retract, and rotate booms or arms. This allows for precise movement and positioning of attachments, enhancing productivity and efficiency in various applications, including digging, lifting, loading, and material handling.
  • Versatility and Adaptability: Boom cylinders are available in various sizes, configurations, and specifications, making them adaptable to different types of heavy equipment and applications. They can be customized to meet specific requirements, such as adjusting the force, stroke length, or mounting options, allowing for versatile use in diverse industries, including construction, mining, forestry, and agriculture.
  • Load Handling Capacity: Boom cylinders are designed to handle heavy loads and withstand the rigorous demands of heavy equipment operations. They have high load-bearing capacities and can exert significant force, enabling the equipment to lift and move substantial weights. This capability is essential for tasks that involve lifting and manipulating heavy materials or objects.
  • Precise Control and Maneuverability: Boom cylinders provide precise control over the movement of booms or attachments, allowing operators to perform tasks with accuracy and finesse. The hydraulic system enables smooth and controlled operation, enabling operators to maneuver equipment in tight spaces, navigate obstacles, and perform intricate tasks with ease.
  • Durability and Longevity: Boom cylinders are built to withstand the harsh operating conditions encountered in heavy equipment applications. They are constructed using high-strength materials and undergo rigorous testing to ensure durability and longevity. Proper maintenance and regular inspections can further extend the lifespan of boom cylinders, reducing the need for frequent replacements.
  • Enhanced Safety: Boom cylinders contribute to safety in heavy equipment operations. They enable operators to have precise control over the movement of booms or attachments, reducing the risk of accidents or damage to surrounding structures. Boom cylinders can also be equipped with safety features such as limit switches or pressure relief valves to prevent overextension or overpressure situations.

The advantages of using boom cylinders make them indispensable in heavy equipment applications. They significantly enhance the performance, productivity, and safety of machinery, allowing operators to accomplish a wide range of tasks efficiently in various industries.

boom cylinder

Can boom cylinders be used in manufacturing machinery for material processing?

Yes, boom cylinders can be used in manufacturing machinery for material processing. Here’s a detailed explanation:

In manufacturing processes, material processing machinery is utilized to transform raw materials into finished products. Boom cylinders play a significant role in these machines by providing controlled movement and force to carry out various material processing tasks. Here’s how boom cylinders are used in manufacturing machinery:

  • Press Machines: Press machines are commonly used in manufacturing for tasks such as stamping, bending, and forming metal or other materials. Boom cylinders in press machines enable the controlled movement of the press ram, exerting force on the material to achieve the desired shape or configuration. The cylinders ensure precise and repeatable processing, contributing to the quality and consistency of the manufactured products.
  • Injection Molding Machines: Injection molding is a widely used manufacturing process for producing plastic parts. Boom cylinders are employed in injection molding machines to control the movement of the injection unit and the mold closing unit. The cylinders provide the required force to inject molten plastic into the mold cavity and secure the mold during the molding process. They enable precise positioning and pressure control, ensuring accurate and reliable production of molded parts.
  • Cutting and Shearing Machines: Cutting and shearing machines are used to separate materials into desired shapes or sizes. Boom cylinders are utilized in these machines to control the movement of cutting blades or shearing mechanisms. The cylinders provide the necessary force to cut or shear the material effectively and accurately. They enable smooth and controlled cutting operations, reducing material waste and ensuring high precision.
  • Material Handling Equipment: Material processing often involves the movement and manipulation of materials within the manufacturing facility. Boom cylinders are utilized in various material handling equipment such as conveyors, lifts, and robotic arms. The cylinders enable controlled lifting, lowering, and positioning of materials, facilitating efficient material flow and processing.

The use of boom cylinders in manufacturing machinery for material processing offers several benefits:

  • Precision and Control: Boom cylinders provide precise and controlled movement, ensuring accurate processing and consistent product quality.
  • Efficiency: The controlled movement and force exerted by boom cylinders result in efficient material processing, reducing production time and improving overall productivity.
  • Flexibility: Boom cylinders can be customized to accommodate different material processing requirements. They can be adjusted for various stroke lengths, force capacities, and operating speeds, allowing flexibility in manufacturing processes.
  • Reliability: Boom cylinders are designed to withstand heavy loads and harsh operating conditions. They are built with durable materials and sealing systems, ensuring long-term reliability and minimizing downtime due to cylinder failure.

Overall, boom cylinders are valuable components in manufacturing machinery for material processing. They contribute to precise processing, efficiency, flexibility, and reliability, enabling manufacturers to achieve optimal results in their production processes.

It’s important to consult the equipment manufacturer’s guidelines and recommendations to ensure the proper selection, installation, and maintenance of boom cylinders in manufacturing machinery.

boom cylinder

What is the importance of regular maintenance for boom cylinders?

Regular maintenance for boom cylinders is of utmost importance to ensure their optimal performance, longevity, and safe operation. Here’s a detailed explanation of the importance of regular maintenance:

  • Performance and Efficiency: Regular maintenance helps to maintain the performance and efficiency of boom cylinders. Over time, wear and tear, contamination, and fluid degradation can affect the cylinder’s components, such as seals, rods, and piston surfaces. By conducting routine inspections, cleaning, and lubrication, potential issues can be identified and addressed promptly, ensuring smooth operation, minimizing energy loss, and maximizing the cylinder’s performance.
  • Prevention of Malfunctions: Regular maintenance plays a crucial role in preventing unexpected malfunctions or failures of boom cylinders. By inspecting and maintaining the cylinder, operators and maintenance personnel can identify and address potential issues, such as leaks, damaged seals, or misalignment, before they escalate into more significant problems. Timely maintenance helps prevent costly downtime, equipment damage, and potential safety hazards.
  • Extended Lifespan: Proper maintenance significantly extends the lifespan of boom cylinders. Regular cleaning, lubrication, and inspection help to minimize wear and corrosion on critical components. By addressing issues promptly and performing necessary repairs or replacements, the overall lifespan of the cylinder can be prolonged, reducing the need for premature replacements and associated costs.
  • Safety: Regular maintenance is essential for ensuring the safety of operators and those working around the equipment. Boom cylinders operate under high pressures and handle heavy loads, making their proper functioning crucial for safe operation. By conducting regular maintenance, potential safety hazards can be identified, such as damaged components, leakages, or compromised structural integrity. This allows for timely repairs or replacements, ensuring the safe operation of the boom cylinder and minimizing the risk of accidents or equipment failures.
  • Manufacturer’s Recommendations: Following the manufacturer’s recommended maintenance schedule is vital for boom cylinders. Manufacturers provide specific guidelines on inspection intervals, lubrication requirements, and other maintenance tasks based on the cylinder’s design and usage. Adhering to these recommendations helps maintain warranty coverage, ensures compliance with safety standards, and preserves the cylinder’s optimal performance as intended by the manufacturer.

In conclusion, regular maintenance for boom cylinders is crucial for maintaining performance, preventing malfunctions, extending lifespan, ensuring safety, and adhering to manufacturer’s recommendations. By investing in routine maintenance and addressing any identified issues promptly, operators can maximize the efficiency, reliability, and longevity of boom cylinders, ultimately contributing to the overall productivity and safety of heavy machinery operations.

China Standard The Boom Cylinder of Excavator Hydraulic Cylinder Used for Excavator   vacuum pump booster	China Standard The Boom Cylinder of Excavator Hydraulic Cylinder Used for Excavator   vacuum pump booster
editor by Dream 2024-05-06

China Standard Arm Boom Bucket Stick Mini Excavator Hydraulic Cylinder for CZPT CZPT CZPT Cat CZPT CZPT CZPT vacuum pump connector

Product Description

Part number Tube dia  mm Rod dia  mm Stroke  mm
205-63-57100 120 85 1285
206-63-57100 120 85 1285
205-63-57160 120 85 1285
205-63-57120   135 95 1490
203-63-57130 125 85 1120
203-63-57131 125 85 1120
205-63-57130 125 85 1120

Specifications
1.Supply to USA,Europe,and Australia, Russia.
2.Material:Stainless Steel
3.Professional performance excavator parts supplier
4. High quality and low price

FAQ

Q1: Are you Manufacture or Trade Company?
A1: We are manufacture,we have 20 years experience for supply Metal material and products in domestic.

Q2: How can we guarantee quality?
A2: Always a pre-production sample before mass production;Always final Inspection before shipment;

Q3: What is your terms of payment ?
A3: 1.T/T: 30% deposit in advance, the balance 70% paid before shipment
2.30% down payment, the balance 70% paid against L/C at sight
3.CHINAMFG negotiation

Q4: Can you provide Certificates for aluminum materials ?
A4:Yes,we can supply MTC-Material Test Certificate.

Q5: Can you provide sample?
A5: Yes, we can provide you sample, but you need to pay for the sample and freight firstly. We will return the sample fee after
you make an order.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: GS, RoHS, CE, ISO9001
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Piston Cylinder
Adjusted Form: Switching Type
Customization:
Available

|

boom cylinder

How does a boom cylinder handle variations in load capacity and weight?

A boom cylinder is designed to handle variations in load capacity and weight in heavy machinery. Here’s a detailed explanation:

When a machinery equipped with a boom cylinder is used for different tasks, the load capacity and weight requirements may vary. The boom cylinder is designed to accommodate these variations and ensure optimal performance. Here are the key factors that contribute to how a boom cylinder handles load capacity and weight variations:

  • Force Generation: The boom cylinder generates the necessary force to move the boom, arm, or attachment of the machinery. The force generated by the cylinder can be adjusted based on the load capacity and weight requirements. By controlling the hydraulic pressure and flow rate, the operator can regulate the force exerted by the cylinder, allowing it to handle both lighter and heavier loads.
  • Adjustable Stroke Length: Boom cylinders often have an adjustable stroke length, which is the distance the piston can travel within the cylinder. By adjusting the stroke length, the cylinder can adapt to different load capacities and weight distributions. For heavier loads, a longer stroke may be required to provide the necessary extension or retraction of the boom. Conversely, for lighter loads, a shorter stroke may be sufficient, optimizing the cylinder’s efficiency.
  • Pressure Compensation: Some boom cylinders are equipped with pressure compensation mechanisms. These mechanisms automatically adjust the hydraulic pressure within the cylinder to compensate for variations in load capacity and weight. For example, as the load on the boom increases, the pressure compensation mechanism increases the hydraulic pressure, ensuring consistent force and control throughout the operation.
  • Integration with Load Sensing Systems: Boom cylinders can be integrated with load sensing systems that provide real-time feedback on the load capacity and weight. Load sensing systems use sensors to measure the force exerted on the boom or attachment and transmit this information to the hydraulic control system. The hydraulic control system can then adjust the pressure and flow rate to match the load requirements, optimizing the cylinder’s performance.
  • Multi-Stage Cylinders: In some cases, machinery may be equipped with multi-stage boom cylinders. These cylinders have multiple sections or stages that can be extended or retracted independently. Each stage may have different dimensions and force capabilities. By adjusting the extension or retraction of each stage, the cylinder can adapt to varying load capacities and weight distributions, providing precise control and handling.

By incorporating these design features and mechanisms, a boom cylinder can effectively handle variations in load capacity and weight. This allows the machinery to perform a wide range of tasks with different load requirements, providing versatility and efficiency in industries such as construction, mining, material handling, and more.

boom cylinder

How does a boom cylinder handle variations in cylinder size and capacity?

A boom cylinder is designed to handle variations in cylinder size and capacity. Here’s a detailed explanation:

Boom cylinders are hydraulic actuators used in various applications, such as construction equipment, material handling machinery, or forestry equipment. They are responsible for providing the necessary force and controlled movement to extend, retract, and articulate the boom or arm.

When it comes to handling variations in cylinder size and capacity, boom cylinders are designed and manufactured to match the specific requirements of the equipment and the intended application. Here’s how they handle these variations:

  • Size Customization: Boom cylinders can be customized in terms of size to fit different equipment configurations. The size of the cylinder, including its length and diameter, can be adjusted to ensure proper installation and compatibility with the boom or arm it is attached to. The size customization allows for optimized performance and efficient operation of the equipment.
  • Capacity Selection: Boom cylinders are available in different capacity options to handle varying loads and operating conditions. The capacity of the cylinder refers to its ability to generate the required force to move the boom or arm. Higher capacity cylinders are used for heavy-duty applications, while lower capacity cylinders are suitable for lighter loads. The appropriate capacity selection ensures that the boom cylinder can handle the specific load requirements of the equipment.
  • Pressure and Flow Control: Boom cylinders utilize hydraulic systems to generate the required force. The hydraulic pressure and flow rate can be adjusted or controlled to match the cylinder size and capacity. By regulating the pressure and flow, the boom cylinder can effectively handle variations in size and capacity while maintaining the desired performance and control.
  • Sealing and Internal Components: Boom cylinders are equipped with sealing systems and internal components that are designed to withstand the forces and pressures involved. These components are carefully selected to ensure compatibility with the cylinder size and capacity. Proper sealing and internal components help to maintain the cylinder’s efficiency and prevent leaks or failures, regardless of the size or capacity of the cylinder.

Overall, boom cylinders are engineered to handle variations in cylinder size and capacity by offering customization options, capacity selection, pressure and flow control, and appropriate sealing and internal components. These features ensure that the boom cylinders can effectively and reliably perform their intended functions across different equipment configurations and operating conditions.

It’s important to consult the equipment manufacturer’s guidelines and recommendations when selecting and installing boom cylinders to ensure compatibility and optimal performance.

boom cylinder

What is the importance of regular maintenance for boom cylinders?

Regular maintenance for boom cylinders is of utmost importance to ensure their optimal performance, longevity, and safe operation. Here’s a detailed explanation of the importance of regular maintenance:

  • Performance and Efficiency: Regular maintenance helps to maintain the performance and efficiency of boom cylinders. Over time, wear and tear, contamination, and fluid degradation can affect the cylinder’s components, such as seals, rods, and piston surfaces. By conducting routine inspections, cleaning, and lubrication, potential issues can be identified and addressed promptly, ensuring smooth operation, minimizing energy loss, and maximizing the cylinder’s performance.
  • Prevention of Malfunctions: Regular maintenance plays a crucial role in preventing unexpected malfunctions or failures of boom cylinders. By inspecting and maintaining the cylinder, operators and maintenance personnel can identify and address potential issues, such as leaks, damaged seals, or misalignment, before they escalate into more significant problems. Timely maintenance helps prevent costly downtime, equipment damage, and potential safety hazards.
  • Extended Lifespan: Proper maintenance significantly extends the lifespan of boom cylinders. Regular cleaning, lubrication, and inspection help to minimize wear and corrosion on critical components. By addressing issues promptly and performing necessary repairs or replacements, the overall lifespan of the cylinder can be prolonged, reducing the need for premature replacements and associated costs.
  • Safety: Regular maintenance is essential for ensuring the safety of operators and those working around the equipment. Boom cylinders operate under high pressures and handle heavy loads, making their proper functioning crucial for safe operation. By conducting regular maintenance, potential safety hazards can be identified, such as damaged components, leakages, or compromised structural integrity. This allows for timely repairs or replacements, ensuring the safe operation of the boom cylinder and minimizing the risk of accidents or equipment failures.
  • Manufacturer’s Recommendations: Following the manufacturer’s recommended maintenance schedule is vital for boom cylinders. Manufacturers provide specific guidelines on inspection intervals, lubrication requirements, and other maintenance tasks based on the cylinder’s design and usage. Adhering to these recommendations helps maintain warranty coverage, ensures compliance with safety standards, and preserves the cylinder’s optimal performance as intended by the manufacturer.

In conclusion, regular maintenance for boom cylinders is crucial for maintaining performance, preventing malfunctions, extending lifespan, ensuring safety, and adhering to manufacturer’s recommendations. By investing in routine maintenance and addressing any identified issues promptly, operators can maximize the efficiency, reliability, and longevity of boom cylinders, ultimately contributing to the overall productivity and safety of heavy machinery operations.

China Standard Arm Boom Bucket Stick Mini Excavator Hydraulic Cylinder for CZPT CZPT CZPT Cat CZPT CZPT CZPT   vacuum pump connector	China Standard Arm Boom Bucket Stick Mini Excavator Hydraulic Cylinder for CZPT CZPT CZPT Cat CZPT CZPT CZPT   vacuum pump connector
editor by Dream 2024-04-23

China Standard Excavator Spare Parts Hydraulic Cylinder Boom Bucket Arm Hydraulic Cylinder Made in China with Great quality

Product Description

Excavator Spare Parts Hydraulic Cylinder Boom Bucket Arm Hydraulic Cylinder Made in China

Product Specifications:

Item Specifications
Bore diameter 60mm-250mm,customizable
Bod diameter 40mm-230mm,customizable
Stroke 100mm-400mm,customizable
Working Pressure 7-40Mpa,customizable
Surface treatment of piston rod HaHard Chrome Plating,Electroplated Milky White Chromium+Hard Chromium,Nickel Plating+Hard Chromium Plating,High-Velocity Oxygen-Fuel CrC NiC,Ceramic Coating,Nitriding,Laser Cladding
Work Pressure Maximum 38MPa,Customizable
Material High tensile cold drawn tube, precision honed for extended seal life
Mounting Earring,Flange,Clevis.Foot,Trunnion,Customizable
Seal Type Parker,NOK, Hallite or as customer’s requirement
Warrenty 18 months
MOQ 1 pcs
Production Time Based on order quantity.normally 30-40 days.
Certification ISO9001,CE, SGS
Packaging metal case,plywood case,carton or as requirement 
Service OEM & ODM
Warranty arranwarranty ty  18 months,customizable
Color customizable
Price Advantage Competitive factory price with guaranteed quality
Business Type Manufacturer 

Product Display:

 

Appliactions:Walking machinery,excavator.

Mounting Method:
Other Products:

Our Factory:

Inspection Process:
 

  Inspection Type  Inspection Standard
Raw Material Inspection Before storage, QC takes the measurement of the raw materials.
Process Material Inspection During the production, QCs conduct a random inspection.
Before the hydraulic cylinder parts transferred to the next process, QCs takes inspection.
Final Function Testing All the hydraulic cylinders take hydraulic function test

Inspection of Mechanical Properties of Raw Materials
 

 


Process Inspection


Final Testing


Packing & Delivery:

About US:

Our Certificate

Our Main Customers

ZheJiang Tianjian Hydraulic Technology Co.,Ltd is specializing in the production of various types of hydraulic cylinders as well as cylinder barrel, piston cylinder and other cylinder accessories.

As a highly specialized manufacturer of hydraulic cylinders, tianjian provides design optimization solutions and reliable products to many customers at home and abroad. No matter in construction machinery, railway bridge machinery, port ship machinery, metallurgy and mining machinery, oil and light industry machinery, special vehicles and other industries, tianjian can provide various standard and non-standard hydraulic cylinder design optimization schemes and products according to users’ requirements, and provide integrated services for perfection and quality.

If possible, when contact with us, please apply information as below 

Bore

Rod

Stroke

Work Pressure

Mounting

Work environment

 

 

 

 

 

 

Or you can offer us your sketch diagram or photos so that we could understand you exactly meaning, help us avoid mistakes.

And if you have samples, we can manufacture according to your samples after sending to us.

Welcome to our factory if you have any time.

Your satisfaction is our biggest motivation.

Now, you can contact with us for any question or inquiry.

FAQ:

1, What does your company do?
A: we are a supplier of high quality hydraulic products including Hydraulic Cylinder, Hydraulic Motor, Hydraulic Power Pack, Hydraulic station and other Hydraulic components.
 
2, Are you a manufacture or a trading company?
A: We are a  manufacturer.
 
3, What certificate do you have?
A: All our factories are ISO certificated. And our main suppliers of materials and parts are with CE, RoHS, CSA and UL certificates.
 
4, How long is your delivery time?
A: The delivery time depends on different products and quantity. The cylinder usually need about 45-60 days and the Motor need about 30-50 days.
 
5, Can you make parts as customer’s requirement or drawing?
A: Yes, we can OEM for you as your drawings. Our engineer also can give you professional support for technical suggestions.
 
6, What kind of payment terms do you accept?
A: We prefer T/T through bank. 30% when order is confirmed and 70% before shipment. L/C is also acceptable for amount over 20,000USD.
 
7, What is your warranty policy?
A: All our products are warranted for 1 full year from date of delivery against defects in materials and workmanship. This warranty does not cover parts that are worn out through the course of normal operation or are damaged through negligence. We serious remind that unclean hydraulic oil will definitely cause damage to your Hydraulic components. And this damage is not included in the warranty range. So we strongly suggest you to use new clean oil or make sure the system oil are clean when using our parts

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: GS, RoHS, CE, ISO9001
Pressure: Medium Pressure
Work Temperature: High Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type
Samples:
US$ 300/Set
1 Set(Min.Order)

|

Customization:
Available

|

boom cylinder

How does a boom cylinder handle variations in environmental conditions?

A boom cylinder is designed to handle variations in environmental conditions effectively. Here’s a detailed explanation:

Environmental conditions can vary significantly in different work environments where heavy equipment operates. Boom cylinders are constructed to withstand these variations and continue to function reliably. Here are some ways in which boom cylinders handle variations in environmental conditions:

  • Sealing and Protection: Boom cylinders are equipped with seals and protective measures to prevent the intrusion of contaminants, such as dust, dirt, water, or debris. The seals help maintain the integrity of the hydraulic system and protect internal components from damage caused by environmental factors. Additionally, protective coatings or treatments are often applied to the cylinder’s exterior to enhance its resistance to corrosion and wear.
  • Temperature Resistance: Boom cylinders are designed to operate within a wide temperature range. They are constructed using materials that can withstand both high and low temperatures without compromising performance. Specialized seals and hydraulic fluids are utilized to maintain proper functionality and prevent damage, even in extreme temperature conditions.
  • Fluid Compatibility: Hydraulic fluids used in boom cylinders are carefully selected to ensure compatibility with the anticipated environmental conditions. Factors such as temperature, humidity, and chemical exposure are taken into account when choosing the appropriate hydraulic fluid. The selected fluid should have the necessary viscosity and additives to provide optimal lubrication, prevent foaming, and resist degradation under the specific environmental conditions.
  • Corrosion Resistance: Boom cylinders are often exposed to environments that may contain corrosive elements, such as saltwater, chemicals, or acidic substances. To handle these conditions, cylinders are manufactured using materials that exhibit high corrosion resistance. Protective coatings, such as chrome plating or specialized paint, can be applied to further enhance the cylinder’s ability to withstand corrosive environments.
  • Regular Maintenance: Proper and regular maintenance is essential to keep boom cylinders in optimal condition and mitigate the effects of environmental variations. This includes inspections, cleaning, lubrication, and seal replacements as needed. By following manufacturer-recommended maintenance schedules and procedures, operators can address potential issues early on and ensure the longevity and reliability of the boom cylinders.

By incorporating sealing and protection mechanisms, temperature resistance, fluid compatibility, corrosion resistance, and regular maintenance practices, boom cylinders are designed to handle variations in environmental conditions. These features enable them to operate effectively and maintain their performance in diverse work environments, including construction sites, mining operations, forestry applications, and more.

It’s important to consult the equipment manufacturer’s guidelines and recommendations for specific environmental considerations and maintenance practices related to boom cylinders. This will help ensure the proper functioning and longevity of the cylinders in various operating conditions.

boom cylinder

How does a boom cylinder handle variations in hydraulic seal technology?

A boom cylinder is designed to handle variations in hydraulic seal technology. Here’s a detailed explanation:

Hydraulic seals are critical components in boom cylinders, as they prevent fluid leakage and ensure the efficient operation of the hydraulic system. Over time, advancements in seal technology have led to the development of various types of hydraulic seals with different characteristics and capabilities. A boom cylinder is engineered to accommodate these variations in hydraulic seal technology. Here’s how it handles them:

  • Compatibility: Boom cylinders are designed to be compatible with different types of hydraulic seals. They are constructed with seal grooves and dimensions that allow for the installation of various seal profiles, such as O-rings, lip seals, or piston seals. The cylinder is engineered to work effectively with the specific seal type or design chosen for a particular application.
  • Seal Selection: The selection of hydraulic seals for a boom cylinder depends on factors such as operating conditions, fluid compatibility, pressure requirements, and temperature ranges. The cylinder design takes into account the seal selection process, ensuring that the cylinder’s materials, surface finishes, and tolerances are suitable for the chosen seal technology. This ensures optimal sealing performance and longevity.
  • Seal Retention: Boom cylinders incorporate features to securely retain hydraulic seals in their proper positions. These features may include seal backup rings, snap rings, or integrated seal retention systems. The cylinder’s design ensures that the selected seal technology is effectively retained, preventing seal displacement or failure during operation.
  • Seal Maintenance and Replacement: Boom cylinders are designed to facilitate seal maintenance and replacement. They may include access points or disassembly features that allow for convenient seal inspection, lubrication, or replacement. The cylinder design takes into consideration the specific requirements of the chosen seal technology, making it easier for technicians to service or replace seals as necessary.
  • Seal Performance Optimization: Boom cylinders undergo rigorous testing and validation processes to optimize seal performance. The cylinder’s design and manufacturing processes aim to minimize seal friction, reduce wear, and enhance sealing efficiency. This ensures that the cylinder can effectively handle the specific characteristics and variations of the chosen hydraulic seal technology.

Overall, a boom cylinder is engineered to handle variations in hydraulic seal technology. It is designed to be compatible with different seal types, facilitate seal selection, retain seals securely, allow for seal maintenance and replacement, and optimize seal performance. These features ensure that the boom cylinder can effectively accommodate the advancements and variations in hydraulic seal technology, providing reliable and efficient sealing in hydraulic systems.

It’s important to follow the manufacturer’s recommendations and specifications regarding the selection, installation, and maintenance of hydraulic seals in boom cylinders to ensure optimal performance and longevity.

boom cylinder

What are the key components and features of a boom cylinder?

A boom cylinder consists of several key components and features that enable its functionality and performance in heavy machinery. Here’s a detailed explanation:

  • Cylinder Barrel: The cylinder barrel is the main body of the boom cylinder, typically made of high-strength steel. It houses the piston, seals, and other internal components. The cylinder barrel is designed to withstand high pressure and provide structural integrity to the cylinder.
  • Piston: The piston is a cylindrical component that moves back and forth inside the cylinder barrel. It is usually made of durable materials and acts as a barrier between the two chambers of the cylinder. The piston divides the cylinder into a rod side and a cap side, allowing hydraulic fluid to act on one side or the other to create the desired motion.
  • Rod: The rod is a solid metal shaft attached to the piston and extending outside the cylinder barrel. It transmits the force generated by the hydraulic fluid to the boom or other connected components. The rod is designed to withstand tensile and compressive forces and is often coated or treated to resist corrosion and wear.
  • Seals: Seals are essential components that prevent hydraulic fluid leakage and maintain the integrity of the cylinder. They are positioned between the piston, rod, and cylinder barrel to create a tight seal. Common types of seals used in boom cylinders include piston seals, rod seals, and wiper seals.
  • Ports and Fittings: Boom cylinders have ports and fittings that allow the connection of hydraulic hoses or pipes to supply hydraulic fluid. These ports enable the controlled flow of hydraulic fluid into and out of the cylinder, creating the necessary pressure for boom movement.
  • Mounting Brackets: Mounting brackets are used to attach the boom cylinder to the heavy machinery’s frame or structure. They provide stability and support, ensuring proper alignment and secure installation of the cylinder.
  • Internal Cushions: Some boom cylinders feature internal cushions or shock absorbers. These cushions help dampen the impact and reduce vibrations during the extension or retraction of the boom. Internal cushions improve the smoothness of boom movement, enhance operator comfort, and reduce stress on the cylinder and other components.
  • Corrosion Protection: Boom cylinders are often coated or treated with corrosion-resistant materials to withstand harsh environmental conditions. These protective measures help extend the cylinder’s lifespan and maintain its performance over time.
  • Load Capacity and Pressure Rating: Boom cylinders are designed with specific load capacities and pressure ratings to handle the heavy loads and pressures involved in heavy machinery operations. The load capacity and pressure rating determine the cylinder’s strength and suitability for different applications.

In summary, the key components and features of a boom cylinder include the cylinder barrel, piston, rod, seals, ports and fittings, mounting brackets, internal cushions, corrosion protection, load capacity, and pressure rating. These components and features work together to enable the controlled extension, retraction, lifting, and lowering of the boom in heavy machinery, ensuring efficient and reliable operation.

China Standard Excavator Spare Parts Hydraulic Cylinder Boom Bucket Arm Hydraulic Cylinder Made in China   with Great quality China Standard Excavator Spare Parts Hydraulic Cylinder Boom Bucket Arm Hydraulic Cylinder Made in China   with Great quality
editor by Dream 2024-04-23

China Standard CZPT Loader Spare Parts 10c0062X0 Boom Cylinder with Good quality

Product Description

 

 

 

 Machine, is a physical system using power to apply forces and control movement to perform an action.

 

Machine part, is the heart of every machine. In here, you can find whatever part that you need. 

Applicable loader models are as follows

 

CLG816/CLG816G/CLG816C/CLG820/CLG820C/CLG835/CLG835H/CLG836/ZL30E/ZL40B/CLG842/CLG842H/ZL50C/ZL50CN/CLG855/CLG855N/CLG856/CLG856H/ CLG862/CLG862H /CLG870H/CLG886H/CLG890H/CLG8128H/CLG888/CLG877

 

The main selling machinery parts of CHINAMFG are LIUGONG, SD-LG, , XGMA, SHXIHU (WEST LAKE) DIS.I, SEM, Ko-matsu, CAT, Doosan, and so on. CHINAMFG has more than 2,000,000 machinery parts. A powerful database system provides strong data support even by just giving the part number. No matter original or OEM, you can get whatever you want.

 

More parts haven’t been shown in here, please feel free to contact us.

  

LGMC (ZheJiang CHINAMFG Machinery Co., Ltd), a company that specialized in not only construction machinery, but also more than 2,000,000 machinery parts (included LIUGONG, S-D-L-G,  XGMA, SHXIHU (WEST LAKE) DIS.I, SEM, Ko-matsu, CAT, Doosan, and so on), having all the engineering that can be used in the manufacturing industry, construction industry, general industry, and even agriculture. Those machines have been widely used everywhere with multiple functions. CHINAMFG focuses on heavy machinery investment in research and development of small machinery, winning great popularity in aboard markets. In here you can find everything no matter what you want.

Having a great advantage of location, CHINAMFG located in HangZhou, a city that has extensive rail connections with the rest of China, is the home of LiuGong Company, the biggest industrial base of ZheJiang Province. In line with the principle of “Honesty, High quality, Reliability, and Efficiency”, CHINAMFG has won great recognition in the market in just a few years, has gained support from major domestic manufacturers and trade organizations as well. CHINAMFG occupied the market relies on the good product quality, good after-sales service and exported to South Asia, Southeast Asia, Africa, South America, Mid East, Eastern Europe, and other regions. 24 hours 7 days stand by with a professional selling team, solves all kinds of problems on time, and provides specialized commentary of your questions. Always ready to welcome you and help to have a great cooperation experience.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 3 Months
Warranty: 3 Months
Application: Hoisting Machinery
Certification: CE, ISO9001: 2000
Condition: New
Installation Position: Loader
Customization:
Available

|

boom cylinder

Can boom cylinders be repaired or replaced when damaged?

Yes, boom cylinders can be repaired or replaced when damaged. Here’s a detailed explanation:

Boom cylinders, like any other mechanical component, can experience damage or wear over time due to various factors such as heavy use, environmental conditions, or accidents. However, they can often be repaired or replaced to restore functionality and extend the lifespan of the machinery. Here are the options for addressing damaged boom cylinders:

  • Repair: Depending on the extent of the damage and the specific issue, certain components of a boom cylinder can be repaired. Common repairs may include fixing leaks, replacing damaged seals or gaskets, repairing or replacing damaged rods, or reconditioning the cylinder’s body. These repairs are typically performed by skilled technicians or hydraulic specialists who have expertise in boom cylinder repair.
  • Replacement of Components: In some cases, specific components of a boom cylinder may need to be replaced. This could include replacing damaged rods, piston heads, seals, or other internal parts. By replacing the damaged components, the cylinder can be restored to proper working condition. It’s important to use high-quality replacement parts that meet the manufacturer’s specifications to ensure compatibility and performance.
  • Complete Cylinder Replacement: If the damage to the boom cylinder is extensive or if repair is not feasible, a complete cylinder replacement may be necessary. In such cases, the damaged cylinder is removed from the machinery, and a new or refurbished cylinder is installed. Complete cylinder replacements are typically carried out by authorized service centers or dealerships to ensure proper installation and compatibility with the machinery.

The decision to repair or replace a boom cylinder depends on factors such as the extent of the damage, cost-effectiveness, availability of replacement parts, and the overall condition of the machinery. It is recommended to consult with qualified technicians or professionals who have expertise in hydraulic systems to assess the damage and provide appropriate recommendations.

Regular maintenance and inspections can help detect potential issues with boom cylinders early on, allowing for timely repairs and minimizing downtime. Following the manufacturer’s recommended maintenance schedule and implementing proper operating practices can also contribute to the longevity and reliability of boom cylinders.

boom cylinder

How does a boom cylinder contribute to load distribution and control?

A boom cylinder plays a significant role in load distribution and control. Here’s a detailed explanation:

In various applications such as construction equipment, material handling machinery, and mobile cranes, boom cylinders are responsible for supporting and controlling the load. They help distribute the load forces and provide precise control over the movement of the boom or arm. Here’s how a boom cylinder contributes to load distribution and control:

  • Load Support: Boom cylinders are designed to withstand and support the loads encountered during operation. They are typically mounted between the machine’s main body and the boom structure, providing a connection that carries the weight and forces of the load. The cylinder’s robust construction and load-bearing capacity ensure that the load is evenly distributed and properly supported.
  • Force Generation: Boom cylinders generate the required force to control the movement of the boom or arm. By extending or retracting, the cylinder exerts force on the boom, allowing it to lift, lower, swing, or articulate as needed. The cylinder’s ability to generate and regulate force ensures precise load control, contributing to safe and efficient operation.
  • Load Stabilization: Boom cylinders help stabilize the load during lifting or movement. By resisting undesired movements or vibrations, the cylinder assists in maintaining the load’s stability and preventing excessive swinging, tilting, or shifting. The controlled movement provided by the cylinder helps minimize the risk of load damage or accidents, ensuring safer and more controlled operations.
  • Balance and Alignment: Boom cylinders aid in achieving balance and alignment of the load. By controlling the extension or retraction of the boom, they allow operators to adjust the position of the load relative to the machine’s center of gravity. This balancing capability helps optimize stability, prevent tipping, and enable precise positioning of the load.
  • Controlled Speed: Boom cylinders enable precise control over the speed of load movement. By regulating the extension or retraction speed, the cylinder allows operators to adjust the lifting or lowering speed according to the requirements of the task. This controlled speed enhances load handling precision, minimizes impact forces, and improves overall safety.

The use of a boom cylinder in load distribution and control offers several benefits:

  • Enhanced Safety: Boom cylinders contribute to load stabilization, balance, and controlled movement, reducing the risk of load accidents or instability.
  • Precise Load Handling: The force generation and controlled speed provided by boom cylinders enable operators to handle loads with precision, ensuring accurate placement and minimizing the potential for damage.
  • Improved Efficiency: Boom cylinders facilitate efficient load distribution and control, enhancing productivity and reducing the time required to complete tasks.
  • Load Capacity Optimization: By supporting and distributing the load forces, boom cylinders help optimize the machine’s load capacity and performance.

Overall, a boom cylinder is a crucial component in load distribution and control. It provides load support, generates force, stabilizes the load, aids in balance and alignment, and enables controlled speed. These features contribute to safe, precise, and efficient load handling in various applications.

It’s important to follow the manufacturer’s guidelines and recommendations regarding the selection, installation, and maintenance of boom cylinders to ensure their proper functioning and optimal load control.

boom cylinder

What is the importance of regular maintenance for boom cylinders?

Regular maintenance for boom cylinders is of utmost importance to ensure their optimal performance, longevity, and safe operation. Here’s a detailed explanation of the importance of regular maintenance:

  • Performance and Efficiency: Regular maintenance helps to maintain the performance and efficiency of boom cylinders. Over time, wear and tear, contamination, and fluid degradation can affect the cylinder’s components, such as seals, rods, and piston surfaces. By conducting routine inspections, cleaning, and lubrication, potential issues can be identified and addressed promptly, ensuring smooth operation, minimizing energy loss, and maximizing the cylinder’s performance.
  • Prevention of Malfunctions: Regular maintenance plays a crucial role in preventing unexpected malfunctions or failures of boom cylinders. By inspecting and maintaining the cylinder, operators and maintenance personnel can identify and address potential issues, such as leaks, damaged seals, or misalignment, before they escalate into more significant problems. Timely maintenance helps prevent costly downtime, equipment damage, and potential safety hazards.
  • Extended Lifespan: Proper maintenance significantly extends the lifespan of boom cylinders. Regular cleaning, lubrication, and inspection help to minimize wear and corrosion on critical components. By addressing issues promptly and performing necessary repairs or replacements, the overall lifespan of the cylinder can be prolonged, reducing the need for premature replacements and associated costs.
  • Safety: Regular maintenance is essential for ensuring the safety of operators and those working around the equipment. Boom cylinders operate under high pressures and handle heavy loads, making their proper functioning crucial for safe operation. By conducting regular maintenance, potential safety hazards can be identified, such as damaged components, leakages, or compromised structural integrity. This allows for timely repairs or replacements, ensuring the safe operation of the boom cylinder and minimizing the risk of accidents or equipment failures.
  • Manufacturer’s Recommendations: Following the manufacturer’s recommended maintenance schedule is vital for boom cylinders. Manufacturers provide specific guidelines on inspection intervals, lubrication requirements, and other maintenance tasks based on the cylinder’s design and usage. Adhering to these recommendations helps maintain warranty coverage, ensures compliance with safety standards, and preserves the cylinder’s optimal performance as intended by the manufacturer.

In conclusion, regular maintenance for boom cylinders is crucial for maintaining performance, preventing malfunctions, extending lifespan, ensuring safety, and adhering to manufacturer’s recommendations. By investing in routine maintenance and addressing any identified issues promptly, operators can maximize the efficiency, reliability, and longevity of boom cylinders, ultimately contributing to the overall productivity and safety of heavy machinery operations.

China Standard CZPT Loader Spare Parts 10c0062X0 Boom Cylinder   with Good quality China Standard CZPT Loader Spare Parts 10c0062X0 Boom Cylinder   with Good quality
editor by Dream 2024-04-19

China Standard 2024 Newly Hydraulic Cylinder Boom Cylinder Arm Cylinder Bucket Cylinder Stick Cylinder for Excavator vacuum pump design

Product Description

2571 Hydraulic Cylinder Boom Cylinder Arm Cylinder Bucket Cylinder Stick Cylinder for Excavator 

 

Hydraulic Cylinder

Hydraulic cylinders are important components in earth-moving machines, such as excavators and wheel loaders, as they transform hydraulic force into linear movement, by facilitating the lifting and moving of heavy materials.

Technical Specifications

Part Name

Excavator Hydraulic Cylinder

Material Q345B+40CR

Finish

Smooth

Colors

Black or yellow or blue or orange

Types

hydraulic bucket cylinder/ arm cylinder/ boom cylinder

Surface Hardness HRC49-55
Warranty time one year
Certificate ISO9001:2015
Related parts H link, link rods, bucket tooth, adaptor, teeth pin and lock, excavator boom and arm, undercarriage parts, excavator bucket

Detailed Photos

Features

High Strength 
1.Joint development of new high-strength steel pipes with CHINAMFG domestic special steel enterprises 
2.Increase Work pressure 
  
High Performance 
1. On average, about 20 seconds faster than similar products 
2. Reduced working time by 19% 
  
Light Weight 
1. The lightest weight to win the biggest lift 
2. Steel pipe and hydraulic combined weight loss is about 17% 
3. Working oil volume reduced by 16% 
  
Excellent Design 
1. Optimized design, cylinder bore is reduced, working pressure is increased 
2. Using imported brand seals 
3. Respond to 2 kinds of severe conditions of high temperature and low temperature 
4. Can adapt to -40 °C -110 °C working temperature 
5. Apply 5 utility model patents 
  
Manufacturing Capabilities 
Welded Designs with 1″ to 20″ Bores 
Tie Rod Designs with 2″ to 5″ Bores 
Telescopic Designs, Single & Double Acting 
Large Bore Hydraulic Cylinders 
Stroke Lengths up to 50 Feet 
Designed for Pressures up to 7,500 PSI 
  
Custom Cylinder Features 
Integrated Linear Position Sensors 
Built-in Valves and Manifolds 
Double Ended cylinder designs 
Piggyback cylinder designs 
Integrated Cushioning and Rephasing 
Safety Designs with Velocity Fuses 
Spherical and High-Wear Bushings 
Custom Mounts and End Fittings 
High-Strength / Weight-saving Materials 
Color-matched Paint and Labeling 

Packaging & Shipping


 

Company Profile

HangZhou Packway Technology Development Co., LTD, founded in March 2005, has been at the forefront of innovation, constantly striving to develop cutting-edge technologies and solutions. With our headquarters located in HangZhou,we currently operate 3 subsidiary companies, each connected with different sectors of the machinery market.

Certificate Passed

Our factory has passed the certificate: ISO9001/ISO14001/CE/ROHS

FAQ

Q1: Are you a trading company or a manufacturer ?

A: We have our own factory.

Q2: Are you able to make Non-standard or customized products?

A: Yes, we can.

Q3: How long is your delivery time?

A: Normally, the delivery time is 7 days if we have stock, 20-35 working days if we don’t. but it also depends on the product
requirements and quantity.

Q4: Do you provide samples? Are the samples free or not?

A: Yes, we can provide samples, but they are non-free of charge.

Q5: What is your payment term?

A: 30% deposit T/T or Irrevocable L/C at sight, If you have any questions, please feel free to contact us.

Q6: What are your after-sales services?

A: Before shipment, Each individual product will be strictly inspected on our factory QC Process System. In addition, We have a
Customer Service team to respond to customers’ questions within 12 hours. Being helpful in solving customers’ problems is always our goal. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO9001
Pressure: 2500psi/3000psi
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Rotary
Adjusted Form: Regulated Type
Samples:
US$ 800/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

boom cylinder

What are the safety considerations when using machinery equipped with boom cylinders?

When using machinery equipped with boom cylinders, there are several important safety considerations to keep in mind. Here’s a detailed explanation:

  • Operator Training: Proper operator training is essential to ensure safe operation of machinery equipped with boom cylinders. Operators should receive comprehensive training on the specific equipment they are using, including understanding the functions and controls of the boom cylinder, as well as the associated safety protocols and procedures.
  • Load Capacity and Stability: It is crucial to understand the load capacity and stability limits of the machinery. Exceeding the recommended load capacity can put excessive stress on the boom cylinders, leading to potential failure or instability. Operators should always adhere to the manufacturer’s guidelines regarding load limits and avoid overloading the machinery.
  • Inspections and Maintenance: Regular inspections and maintenance of the boom cylinders are necessary to ensure their safe operation. This includes checking for any signs of wear, leaks, or damage to the cylinders, as well as ensuring proper lubrication and functioning of all components. Any identified issues should be addressed promptly to prevent accidents or equipment failures.
  • Proper Use of Safety Devices: Machinery equipped with boom cylinders may have safety devices such as limit switches, pressure relief valves, or overload protection systems. Operators should be familiar with these safety devices and use them correctly to prevent overextension, overpressure, or other hazardous situations.
  • Proximity Hazards and Safety Zones: Operators and workers in the vicinity of machinery with boom cylinders should be aware of the potential hazards associated with the moving boom. Establishing safety zones and barriers can help prevent accidental contact with the boom, reducing the risk of injury.
  • Hydraulic System Safety: Boom cylinders rely on hydraulic systems to function. It is important to follow proper hydraulic system safety protocols, such as using the correct hydraulic fluid, maintaining appropriate fluid levels, and inspecting hoses and fittings for leaks or damage. Any issues with the hydraulic system should be addressed promptly by qualified personnel.
  • Emergency Stop Procedures: Operators should be familiar with emergency stop procedures and know how to quickly and safely shut down the machinery in case of an emergency or malfunction. Clear communication channels and emergency protocols should be established to ensure a rapid response in critical situations.
  • Personal Protective Equipment (PPE): Operators and workers should wear appropriate personal protective equipment, such as hard hats, safety glasses, high-visibility clothing, and steel-toed boots, when working with machinery equipped with boom cylinders. PPE can help protect against potential hazards and mitigate the risk of injuries.

By considering these safety factors and implementing proper safety measures, the risks associated with operating machinery equipped with boom cylinders can be minimized. It is crucial to prioritize safety at all times and promote a culture of safety awareness among operators and workers involved in the operation of such machinery.

boom cylinder

Can boom cylinders be used in mining equipment for material transport?

Yes, boom cylinders can be used in mining equipment for material transport. Here’s a detailed explanation:

Mining operations involve the extraction, transportation, and processing of various types of materials, such as ores, coal, and minerals. Boom cylinders play an important role in mining equipment for material transport. Here’s how boom cylinders are utilized in this context:

  • Excavators: Excavators are commonly used in mining operations for digging and loading materials onto trucks or conveyors. Boom cylinders in excavators enable the controlled movement and positioning of the boom and bucket. They provide the necessary force to lift and transport large volumes of material efficiently and safely.
  • Articulated Trucks: Articulated trucks are used for transporting mined materials within the mining site. Boom cylinders are employed in the dump body of articulated trucks to facilitate controlled dumping of the materials. The cylinders enable the lifting and tilting of the dump body, allowing the material to be discharged at desired locations.
  • Stackers and Reclaimers: Stackers and reclaimers are used in mining and bulk material handling operations to stack and reclaim materials in stockpiles. Boom cylinders are utilized in the boom or conveyor systems of these machines to control the movement and positioning of the boom or conveyor. This enables the precise stacking and reclaiming of materials, optimizing storage capacity and material flow.
  • Ship Loaders and Unloaders: Ship loaders and unloaders are specialized equipment used in mining ports and terminals. Boom cylinders are integral components of these machines, enabling the controlled movement and positioning of the boom or conveyor systems. They facilitate the loading or unloading of materials onto or from ships with precision and efficiency.

The use of boom cylinders in mining equipment for material transport offers several benefits:

  • Efficient Material Handling: Boom cylinders provide the necessary force and controlled movement to handle large volumes of materials efficiently. They enable quick and precise loading, unloading, stacking, and reclaiming of materials, optimizing productivity and reducing operational costs.
  • Versatility: Boom cylinders can be customized to match the specific requirements of different mining equipment and material transport tasks. They can accommodate varying load capacities, reach requirements, and operating conditions, ensuring versatility in material handling operations.
  • Operator Safety: Boom cylinders contribute to operator safety during material transport operations. The controlled movement and stability provided by boom cylinders minimize the risk of accidents or injuries caused by uncontrolled material movement or sudden shifts in load.
  • Durability: Boom cylinders are designed to withstand the demanding conditions of mining environments. They are constructed with robust materials and sealing systems to ensure durability and longevity, even in harsh operating conditions.

Overall, boom cylinders are valuable components in mining equipment for material transport. They enable efficient material handling, versatility, operator safety, and durability in mining operations.

It’s important to consult the equipment manufacturer’s guidelines and recommendations to ensure the proper selection, installation, and maintenance of boom cylinders in mining equipment.

boom cylinder

What is the importance of regular maintenance for boom cylinders?

Regular maintenance for boom cylinders is of utmost importance to ensure their optimal performance, longevity, and safe operation. Here’s a detailed explanation of the importance of regular maintenance:

  • Performance and Efficiency: Regular maintenance helps to maintain the performance and efficiency of boom cylinders. Over time, wear and tear, contamination, and fluid degradation can affect the cylinder’s components, such as seals, rods, and piston surfaces. By conducting routine inspections, cleaning, and lubrication, potential issues can be identified and addressed promptly, ensuring smooth operation, minimizing energy loss, and maximizing the cylinder’s performance.
  • Prevention of Malfunctions: Regular maintenance plays a crucial role in preventing unexpected malfunctions or failures of boom cylinders. By inspecting and maintaining the cylinder, operators and maintenance personnel can identify and address potential issues, such as leaks, damaged seals, or misalignment, before they escalate into more significant problems. Timely maintenance helps prevent costly downtime, equipment damage, and potential safety hazards.
  • Extended Lifespan: Proper maintenance significantly extends the lifespan of boom cylinders. Regular cleaning, lubrication, and inspection help to minimize wear and corrosion on critical components. By addressing issues promptly and performing necessary repairs or replacements, the overall lifespan of the cylinder can be prolonged, reducing the need for premature replacements and associated costs.
  • Safety: Regular maintenance is essential for ensuring the safety of operators and those working around the equipment. Boom cylinders operate under high pressures and handle heavy loads, making their proper functioning crucial for safe operation. By conducting regular maintenance, potential safety hazards can be identified, such as damaged components, leakages, or compromised structural integrity. This allows for timely repairs or replacements, ensuring the safe operation of the boom cylinder and minimizing the risk of accidents or equipment failures.
  • Manufacturer’s Recommendations: Following the manufacturer’s recommended maintenance schedule is vital for boom cylinders. Manufacturers provide specific guidelines on inspection intervals, lubrication requirements, and other maintenance tasks based on the cylinder’s design and usage. Adhering to these recommendations helps maintain warranty coverage, ensures compliance with safety standards, and preserves the cylinder’s optimal performance as intended by the manufacturer.

In conclusion, regular maintenance for boom cylinders is crucial for maintaining performance, preventing malfunctions, extending lifespan, ensuring safety, and adhering to manufacturer’s recommendations. By investing in routine maintenance and addressing any identified issues promptly, operators can maximize the efficiency, reliability, and longevity of boom cylinders, ultimately contributing to the overall productivity and safety of heavy machinery operations.

China Standard 2024 Newly Hydraulic Cylinder Boom Cylinder Arm Cylinder Bucket Cylinder Stick Cylinder for Excavator   vacuum pump design		China Standard 2024 Newly Hydraulic Cylinder Boom Cylinder Arm Cylinder Bucket Cylinder Stick Cylinder for Excavator   vacuum pump design
editor by Dream 2024-04-19

China Standard Large Excavator Double Acting Bucket Boom Arm Hydraulic Cylinder vacuum pump distributors

Product Description

                   

                      Large excavator double acting bucket boom arm hydraulic cylinder

 

Product Description

 

*Provide various surface anti-corrosion treatment solutions: Ni/Cr electroplating, ceramic spraying, laser cladding, QPQ, etc

*Can be designed and equipped with integrated hydraulic locks, explosion-proof valves, oil pipes, etc. according to requirements

*Designed with a wide temperature resistance range (-25 ºC to+120 ºC), and able to provide customized services for higher or lower temperature oil cylinders

 Customizable according to customer requirements
 

Detailed Photos

 

Other hydraulic cylinders:

Company Profile

About US:

Tianjian Hydraulic. is a leader in the engineering design and manufacture of high pressure hydraulic cylinders that are widely used in the fields of mining, metallurgy, construction machinery, marine, offshore, water engineering, wind power, hydraulic press, agricultural machinery, and so on.

The Tianjian team has almost 8 years experience delivering innovative and dependable solutions to meet OEM high pressure hydraulic cylinder needs.

If possible, when contact with us, please apply information as below 
 

Bore

Rod

Stroke

Work Pressure

Mounting

Work environment

 

 

 

 

 

 

Or you can offer us your sketch diagram or photos so that we could understand you exactly meaning, help us avoid mistakes.

And if you have samples, we can manufacture according to your samples after sending to us.

Welcome to our factory if you have any time.

Your satisfaction is our biggest motivation.

Now, you can contact with us for any question or inquiry.

 

Certifications

 

FAQ

1, What does your company do?
A: we are a professional supplier of high quality hydraulic cylinders for more than 8 years.
 
2, Are you a manufacture or a trading company?
A: We are a  manufacturer.
 
3, What certificate do you have?
A: All our factories are ISO certificated. And our main suppliers of materials and parts are with CE, RoHS, and UL certificates.
 
4, How long is your delivery time?
A: The delivery time depends on different products and quantity. The cylinder usually need about 15-60 days.
 
5, Can you make parts as customer’s requirement or drawing?
A: Yes, we can OEM for you as your drawings. Our engineer also can give you professional support for technical suggestions.
 
6, What kind of payment terms do you accept?
A: We prefer T/T through bank. 30% when order is confirmed and 70% before shipment. Can be megotiated.
 
7, What is your warranty policy?
A: All our products are warranted for 1 full year from date of delivery against defects in materials and workmanship. This warranty does not cover parts that are worn out through the course of normal operation or are damaged through negligence. We serious remind that unclean hydraulic oil will definitely cause damage to your Hydraulic components. And this damage is not included in the warranty range. So we strongly suggest you to use new clean oil or make sure the system oil are clean when using our parts

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 5 Years
Warranty: 1 Year
Type: Pistons
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Samples:
US$ 300/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

boom cylinder

What are the advantages of using boom cylinders in heavy equipment?

Using boom cylinders in heavy equipment offers several advantages. Here’s a detailed explanation:

Boom cylinders play a critical role in the movement and control of booms, arms, or attachments in heavy equipment, such as excavators, cranes, loaders, and bulldozers. The advantages of using boom cylinders include:

  • Powerful and Precise Movement: Boom cylinders provide powerful hydraulic force that enables heavy equipment to lift, extend, retract, and rotate booms or arms. This allows for precise movement and positioning of attachments, enhancing productivity and efficiency in various applications, including digging, lifting, loading, and material handling.
  • Versatility and Adaptability: Boom cylinders are available in various sizes, configurations, and specifications, making them adaptable to different types of heavy equipment and applications. They can be customized to meet specific requirements, such as adjusting the force, stroke length, or mounting options, allowing for versatile use in diverse industries, including construction, mining, forestry, and agriculture.
  • Load Handling Capacity: Boom cylinders are designed to handle heavy loads and withstand the rigorous demands of heavy equipment operations. They have high load-bearing capacities and can exert significant force, enabling the equipment to lift and move substantial weights. This capability is essential for tasks that involve lifting and manipulating heavy materials or objects.
  • Precise Control and Maneuverability: Boom cylinders provide precise control over the movement of booms or attachments, allowing operators to perform tasks with accuracy and finesse. The hydraulic system enables smooth and controlled operation, enabling operators to maneuver equipment in tight spaces, navigate obstacles, and perform intricate tasks with ease.
  • Durability and Longevity: Boom cylinders are built to withstand the harsh operating conditions encountered in heavy equipment applications. They are constructed using high-strength materials and undergo rigorous testing to ensure durability and longevity. Proper maintenance and regular inspections can further extend the lifespan of boom cylinders, reducing the need for frequent replacements.
  • Enhanced Safety: Boom cylinders contribute to safety in heavy equipment operations. They enable operators to have precise control over the movement of booms or attachments, reducing the risk of accidents or damage to surrounding structures. Boom cylinders can also be equipped with safety features such as limit switches or pressure relief valves to prevent overextension or overpressure situations.

The advantages of using boom cylinders make them indispensable in heavy equipment applications. They significantly enhance the performance, productivity, and safety of machinery, allowing operators to accomplish a wide range of tasks efficiently in various industries.

boom cylinder

Can boom cylinders be used in aerial work platforms for boom extension?

Yes, boom cylinders can be used in aerial work platforms for boom extension. Here’s a detailed explanation:

Aerial work platforms, also known as aerial lifts or cherry pickers, are used to provide elevated access for various tasks such as maintenance, construction, and inspection. Boom cylinders play a crucial role in the operation of aerial work platforms by enabling the extension of the boom or arm. Here’s how boom cylinders are used for boom extension in aerial work platforms:

  • Boom Extension: Boom cylinders are responsible for extending and retracting the boom or arm of the aerial work platform. They provide the necessary force and controlled movement to extend the boom to the desired height or reach and retract it when required. The cylinders allow for smooth and precise extension, ensuring safe and efficient access to elevated work areas.
  • Telescopic Boom Design: Many aerial work platforms feature telescopic booms that consist of multiple sections that can be extended or retracted. Boom cylinders are utilized to extend and retract these sections, allowing the platform to reach greater heights or reach out over obstacles. The cylinders facilitate synchronized movement of the boom sections, ensuring stability and control during extension.
  • Operator Control: Boom cylinders in aerial work platforms are controlled by the platform operator. The operator uses hydraulic controls to extend or retract the boom, adjusting the platform’s height or reach as needed. The smooth and responsive movement provided by the cylinders allows precise positioning of the platform, enabling safe and accurate completion of tasks at elevated locations.
  • Stability and Safety: Boom cylinders contribute to the stability and safety of aerial work platforms during boom extension. The cylinders are designed to handle the loads and forces encountered during operation, ensuring that the boom remains stable and secure at various extension lengths. This stability minimizes the risk of tipping or instability, providing a safe working environment for the operators.

The use of boom cylinders in aerial work platforms for boom extension offers several benefits:

  • Enhanced Reach: Boom cylinders enable aerial work platforms to reach greater heights or extend over obstacles, expanding the range of work that can be performed.
  • Flexible Positioning: The controlled movement provided by boom cylinders allows precise positioning of the platform, enabling operators to access specific areas or work at different heights with ease.
  • Safe Operation: Boom cylinders contribute to the stability and safety of aerial work platforms during boom extension, reducing the risk of accidents or instability.
  • Efficient Work: The smooth and controlled extension facilitated by boom cylinders enhances productivity and efficiency in completing tasks at elevated locations.

Overall, boom cylinders are essential components in aerial work platforms for boom extension. They enable the extension and retraction of the boom, provide operator control, ensure stability and safety, and enhance the reach and flexibility of the platform. These features make boom cylinders integral to the safe and efficient operation of aerial work platforms.

It’s important to follow the manufacturer’s guidelines and recommendations regarding the installation, operation, and maintenance of boom cylinders in aerial work platforms to ensure their proper functioning and optimal safety.

boom cylinder

What industries commonly use boom cylinders in their equipment?

Boom cylinders are commonly used in various industries that rely on heavy machinery for their operations. Here are some industries that commonly utilize boom cylinders:

  • Construction: The construction industry extensively uses boom cylinders in equipment such as excavators, backhoes, bulldozers, and cranes. Boom cylinders are essential for tasks like excavation, material handling, and lifting heavy loads, providing the necessary power and control for these operations.
  • Mining: In the mining industry, boom cylinders are integral to mining equipment like hydraulic shovels, loaders, and haul trucks. They enable the movement of the boom or arm, allowing for efficient digging, loading, and transportation of large quantities of materials or ores.
  • Material Handling: Industries involved in material handling, such as warehouses, logistics, and shipping, utilize boom cylinders in equipment like forklifts, reach stackers, and container handlers. Boom cylinders enable the lifting and positioning of heavy loads, enhancing efficiency and productivity in these operations.
  • Agriculture: Agricultural machinery, including tractors, harvesters, and loaders, often rely on boom cylinders for various tasks. These cylinders facilitate activities like lifting and tilting of attachments, such as buckets or forks, allowing farmers and agricultural workers to handle crops, feed, and other materials with ease.
  • Forestry: In the forestry industry, boom cylinders are used in forestry equipment like log loaders and forwarders. These cylinders assist in the manipulation and handling of logs or timber, enabling efficient loading, unloading, and stacking of wood products.
  • Waste Management: The waste management sector utilizes boom cylinders in equipment like garbage trucks, waste compactors, and recycling machinery. Boom cylinders aid in the movement of collection arms or compaction mechanisms, facilitating the efficient collection, compaction, and disposal of waste materials.
  • Demolition: In the demolition industry, boom cylinders are employed in equipment like demolition excavators or high-reach excavators. These cylinders provide the necessary power and control to extend and maneuver the boom, enabling precise demolition of structures and buildings.

These are just a few examples, and boom cylinders may find application in other industries where heavy machinery is utilized for specific tasks. Overall, boom cylinders play a vital role in industries that require the lifting, manipulation, and control of heavy loads, contributing to improved efficiency and productivity in their equipment.

China Standard Large Excavator Double Acting Bucket Boom Arm Hydraulic Cylinder   vacuum pump distributorsChina Standard Large Excavator Double Acting Bucket Boom Arm Hydraulic Cylinder   vacuum pump distributors
editor by CX 2024-04-13

China Standard China Professional Manufacture Hydraulic Boom Cylinder for Side Loader Garbage Truck vacuum pump

Product Description

 

Hydraulic Cylinder used on Front Loader
Hydraulic cylinders are an integral part of many machines and devices, and front loaders are no exception. Front loaders, also known as front end loaders or simply loaders, are heavy equipment machines used for moving, handling, and lifting materials such as dirt, sand, rocks, and other construction debris. The hydraulic cylinder in a front loader is a key component that enables the machine to perform its various functions. It is responsible for lifting the bucket and moving it into position to scoop up material. The hydraulic cylinder also allows the bucket to be lowered and dumped, releasing the material at the desired location.The combination of the hydraulic cylinder and the front loader is a force to be reckoned with. They work together seamlessly, enabling the loader to perform tasks quickly and efficiently. The hydraulic cylinder’s strength and precision make it an indispensable part of the front loader, ensuring its smooth operation and reliability.

 

Hydraulic Cylinder used on Side Loader
The side loader garbage truck is a remarkable piece of engineering, designed with efficiency and hygiene in mind. The truck’s unique design, which includes a hydraulic cylinder, allows it to handle large volumes of trash with ease.The hydraulic cylinder in a side loader is made up of 2 main parts: the cylinder tube and the piston. The cylinder tube is a hollow metal cylinder that contains the hydraulic fluid. The piston is a CHINAMFG metal rod that slides within the cylinder tube. The hydraulic cylinder is the driving force behind the side loader garbage truck’s capabilities. It powers the lifting and tilting mechanisms that are essential for emptying trash containers into the truck’s body. The cylinder uses pressurized hydraulic fluid to generate the force necessary to manipulate the trash container.

 

Hydraulic Cylinder used on Rear Loader
The rear loader garbage truck is a specialized vehicle designed to handle the collection and disposal of trash in an efficient and hygienic manner. It features a unique loading mechanism that allows trash to be emptied directly into the truck’s body from the side, rather than from the rear or top.The hydraulic cylinder is what powers the trash container lifting mechanism. It uses pressurized hydraulic fluid to generate the force needed to tilt and empty the trash container into the truck’s hopper. This design allows for quick and effortless emptying, reducing the time and effort needed for trash collection.The hydraulic cylinder in a rear loader must be able to withstand significant forces and pressures, as it is responsible for lifting heavy loads and repeatedly performing this task over time. 

About Us
Established in  1988, HangZhou LD Machinery Co, LTD. (hereinafter referred to “LD”) is a leading manufacturer specializing in the design, research, development, manufacture and marketing in the hydraulic industry. Being one of major suppliers of customized components and cylinders for manufacturers spreaded all over the world, the company is committed to offer high quality products with competitive prices and excellent service worldwide.

Headquartered in HangZhou City, ZHangZhoug Province, the company wholly owns a subsidiary production factory named “HangZhou YUEWEI Hydraulic Technology Co., Ltd”, which covers an area of more than  380,000 square meters, possesses abundant technical strength and sound production management system, superior machining production equipment, strict and effective quality control system, advanced and excellent inspection instruments.

More than  35 years experience in machining industry, with over  10 experienced technical engineers and  150 skilled workers, LD has a senior engineering technical team with special skills and rich experience in product design, casting, forging, and CNC machining, can handle special material, structure, defect and processing, meet the evolving needs, and provide optimal solution and real one-stop service to customers.
 

Hydraulic Cylinder Producing Process

Step1: Quality Control on Raw Material
We have our own lab in factory, inspect the raw material and do the test. For every batch of material we received, we will ask supplier provide their certificate, and then cut them to do the test again to see if the results match the certification. Also, every batch we received, we will cut them into pieces to check the air bubbles. Once they are all qualified, we will accept it, and all detail information will be recording in our ERP system. We will also pay lot of attention on the salt spray test for chrome rod. Every month, we will cut the material, put them into test machine to see if it reach the requirement. All the result will be recorded at our QC department. If customer need, we can provide it.

Step2: Quality Control on Machining

we start doing components machining from 1988 with 36 years experience now and insist doing 100% inspection. We spend lots of money, invest on auto robots and machines. Now half of the producing line is by robot so that we can ensure our quality be stable good. For every part of the cylinder, we do 3 times inspecting. Firstly, workers will do self inspection. Secondly, we have tour-hour inspection checking the products, 2 times in the morning and 2 times in the afternoon, make sure that every step is good. After the products are all completed, we will do 100% inspection. For thread, for the tolerance, everything, we need double check. Also, we have specific warehouse just for the measuring tools. Every inspector have their own measuring tool and we will check the measuring tools regularly to make sure they are all in good condition, so that the measuring results will be convincing.

Step3: Quality Control on Welding

We are qualified to AWS certification, which is very popular in North American market. First, for the visual test, we will make sure that every components are welded good, look beautiful. And the second, we need to check the penetration. We have more than 15 years experience, we do know what kind of designing angle can make the cylinder welding strong. Once we finish the first article, we will cut it and analyse the welding to see if it is fulfill the groove. And then do the radiographic testing to make sure there is no gap inside. What’s more, we will do the ultrasonic test to check the program for the robot. Now 80% of welding is doing by robot. Once the program confirmed, no 1 can change it unless the welding manager, and they only have 5% right.

Step4: Quality Control on Assembling
For assembling, we have some difference with others. The brand we uses for seals are all those famous brand like Aston, Parker, Hallite. The cylinder we give to our customer has 2 years warranty. For our company, we engrave our part number and manufacturing date for the quality warranty. So no matter for seals or any others, as long as they are parts of cylinder, if it is under 2 years, we will take responsibility for them. And we will do the test for every cylinder like for pressure after we finish assembling.

Step5: Quality Control on Painting
We have our half auto painting line. Right now, we can paint about 1500 cylinders per day, which is about 1 container. Before we do the painting, we will do the wash first and for every cylinder, we will test for hardness, thickness and adhesion to make sure the painting are all good, which will be recorded into OQC report, print out and stick on the box, ship to you with your products.

Step6: Hydraulic Cylinder Packing
For every cylinder, we have the stick to show the detail information like bore size, stroke and working pressure. And we will use individual plastic bag packing. If customer need, we can also use individual carton box packing. We will fasten 1 floor after 1 floor with plat, so customer can only cut what they need and other layer will still be fasten. Moreover, there will be plywood pallet or plywood box for customer choosing. We will also send the loading picture to customer after we ship them to make sure everything is well loaded in China.

Packing Reference

Order Process

Enterprise Features

FAQ
Q1. What is LD product’s quality assurance?
100% inspection for each product before shipping with inspection rereport for tracking.

Q2: How long is the warranty on LD products?
The warranty is 2 years for general products since the date of shipment.

Q3: How LD deal with the quality problem during warranty period?
1. LD will take the corresponding cost caused by customer local reparing. 
2. LD will provide the product by free if the repair cost is higher than the product value, but the freight involved shall be borne by customer side.

Q4: How to ensure the order can be shipped on time?
LD will send the “production schedule” every week after receiving customers’ orders. If any delays, LD will inform customers 3 weeks in advance, so as to facilitate the customer to arrange the schedule.

Q5: Does LD offer delivery service?
Yes. LD has deep cooperation with logistics companies all over the world to provide customers with quick and convenient “Door-to-Door services”,including sea, air and express.

Q6: How LD control the product quality?
1. Raw materials: We will test the material of each batch of raw materials we receive, and the piston rod will be tested with salt spray. This is to ensure that the material of our products meets the requirements at the beginning.
2. Processing: We have the leading machining equipment, and obtained ISO9001 certification.
3. Welding: Our factory is equipped with welding robots, and has obtained the AWS certification.
4. Assembly pressure test: 100% testing with OQC report for cHangZhou. The seals we use are: Hallite, Aston and Gapi

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO9001
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type
Samples:
US$ 299/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

boom cylinder

How does a boom cylinder contribute to energy-efficient equipment operation?

A boom cylinder plays a significant role in achieving energy-efficient equipment operation. Here’s a detailed explanation:

Energy efficiency is a crucial consideration in modern equipment design, as it helps reduce operating costs, minimize environmental impact, and optimize performance. Boom cylinders contribute to energy-efficient equipment operation in several ways:

  • Optimized Hydraulic System: Boom cylinders are part of a hydraulic system that operates the equipment. By designing the hydraulic system to match the load requirements and minimize pressure losses, boom cylinders can contribute to energy efficiency. Proper sizing of hydraulic components, including the cylinder, pump, and valves, ensures that the system operates at optimal efficiency, reducing energy waste.
  • Variable Force Control: Boom cylinders offer variable force control, allowing operators to match the force exerted during lifting and lowering operations to the specific load requirements. By adjusting the force to the minimum necessary level, energy consumption is reduced, resulting in more efficient equipment operation.
  • Reduced Friction and Leakage: Boom cylinders are designed to minimize friction and prevent leakage. Friction can cause energy loss within the system, while leakage leads to a loss of hydraulic fluid and subsequent energy waste. By incorporating high-quality seals, precision manufacturing, and effective lubrication, boom cylinders help reduce friction and prevent leakage, maximizing the overall energy efficiency of the equipment.
  • Controlled Movement: Boom cylinders enable precise and controlled movement during lifting and lowering operations. This controlled movement minimizes unnecessary acceleration, deceleration, and jerky motions that can lead to energy waste. Smooth and controlled movement provided by the boom cylinder ensures that energy is efficiently utilized to perform the required tasks.
  • Integration with Energy Recovery Systems: In some equipment designs, boom cylinders can be integrated with energy recovery systems. These systems capture and store energy that would otherwise be dissipated as heat or wasted during deceleration or load lowering. By recovering and reusing this energy, equipment operation becomes more energy-efficient and sustainable.

By optimizing the hydraulic system, providing variable force control, minimizing friction and leakage, enabling controlled movement, and integrating with energy recovery systems, boom cylinders significantly contribute to energy-efficient equipment operation. These features help reduce energy consumption, improve overall efficiency, and promote sustainable practices in various industries.

It’s important to note that the energy efficiency of equipment operation is influenced by various factors beyond the boom cylinder alone. Proper equipment maintenance, operator training, and system design considerations also play crucial roles in achieving optimal energy efficiency.

boom cylinder

Can boom cylinders be used in forestry equipment for tree handling?

Yes, boom cylinders can be used in forestry equipment for tree handling. Here’s a detailed explanation:

Forestry equipment is specifically designed for various tasks related to the harvesting, processing, and transportation of trees and timber. Boom cylinders play a crucial role in tree handling within forestry equipment. Here’s how boom cylinders are utilized in this context:

  • Tree Felling: Boom cylinders are used in tree felling equipment, such as feller-bunchers or harvesters. They provide the necessary hydraulic force to control the cutting head or cutting arm, allowing operators to fell trees with precision and control. Boom cylinders enable smooth and controlled movement during the tree felling process.
  • Tree Loading and Unloading: In forestry equipment used for log loading and unloading, such as log loaders or skidders, boom cylinders are employed to handle the trees. They enable the lifting, lowering, and positioning of logs or tree stems for loading onto trucks or transporting within the logging site. Boom cylinders provide the necessary force and controlled movement for efficient tree handling.
  • Tree Processing: Forestry equipment used for tree processing, such as delimbers or debarkers, utilize boom cylinders to manipulate the trees during the processing operations. Boom cylinders facilitate the controlled movement, positioning, and rotation of the trees, allowing for efficient and precise processing.
  • Attachment Control: Boom cylinders are also used to control various attachments in forestry equipment. For example, grapples or clamps used for tree handling can be actuated by boom cylinders. This enables secure gripping, lifting, and manipulation of trees, enhancing the efficiency and safety of tree handling operations.

The use of boom cylinders in forestry equipment for tree handling offers several benefits:

  • Precise Control: Boom cylinders provide operators with precise control over the movement and positioning of trees. This precision allows for accurate felling, loading, unloading, and processing of trees, minimizing waste and optimizing productivity.
  • Efficient Tree Handling: Boom cylinders enable efficient tree handling by providing the necessary force to lift and manipulate trees of various sizes and weights. The controlled movement and positioning facilitated by boom cylinders streamline the workflow and reduce manual effort, improving overall productivity.
  • Operator Safety: Boom cylinders contribute to operator safety during tree handling operations. The controlled movement and stability provided by boom cylinders minimize the risk of accidents or injuries caused by uncontrolled tree movement or sudden shifts in load.
  • Adaptability: Boom cylinders can be customized to match the specific requirements of different forestry equipment and tree handling tasks. This adaptability allows for versatility in tree handling, accommodating various tree species, sizes, and terrain conditions.

Overall, boom cylinders are valuable components in forestry equipment for tree handling. They enable precise control, efficient tree manipulation, operator safety, and adaptability to various tree handling tasks in the forestry industry.

It’s important to consult the equipment manufacturer’s guidelines and recommendations to ensure the proper selection, installation, and maintenance of boom cylinders in forestry equipment.

boom cylinder

Can boom cylinders be customized for specific machinery and equipment?

Yes, boom cylinders can be customized to fit specific machinery and equipment requirements. Here’s a detailed explanation:

Boom cylinders are designed to provide the necessary force and control for the movement of booms, arms, or attachments in heavy machinery. They come in various sizes, configurations, and specifications to accommodate different equipment and applications.

Customization of boom cylinders involves tailoring their design and parameters to meet the specific needs of the machinery and equipment they will be installed in. Here are some aspects that can be customized:

  • Size and Dimensions: Boom cylinders can be customized in terms of their physical size and dimensions to ensure proper fitment and integration with the machinery. Factors such as stroke length, bore diameter, and overall length can be adjusted to match the space constraints and requirements of the equipment.
  • Force and Pressure Ratings: The force and pressure ratings of boom cylinders can be customized to suit the load capacities and operating conditions of the machinery. By adjusting the bore size, rod diameter, and hydraulic pressure specifications, the cylinder can be optimized to provide the necessary power and performance for the specific equipment.
  • Mounting Options: Boom cylinders can be customized with different mounting options to ensure compatibility with the machinery’s mounting points and structures. This includes variations in mounting brackets, pin sizes, and connection methods to facilitate seamless installation and operation.
  • Seal and Material Selection: The choice of seals and materials can be customized based on the operating environment and requirements of the machinery. Different seals, such as wipers and rod seals, can be selected to provide enhanced protection against contamination and improve longevity. The cylinder’s body and rod materials can also be tailored to withstand specific operating conditions, such as extreme temperatures or corrosive environments.
  • Integration with Control Systems: Customization may involve integrating the boom cylinder with the machinery’s existing control systems. This can include adapting the hydraulic connections, sensor compatibility, or incorporating specialized control valves to ensure seamless integration and optimal performance.

The customization of boom cylinders allows equipment manufacturers and operators to obtain cylinders that are specifically designed to meet their unique machinery and equipment requirements. This ensures efficient operation, precise control, and optimal performance for a wide range of applications in industries such as construction, agriculture, forestry, and more.

China Standard China Professional Manufacture Hydraulic Boom Cylinder for Side Loader Garbage Truck   vacuum pump	China Standard China Professional Manufacture Hydraulic Boom Cylinder for Side Loader Garbage Truck   vacuum pump
editor by CX 2024-04-12